Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG Electrolux FAVORIT 75011 VIL
Summary of Contents for AEG Electrolux FAVORIT 75011 VIL
- Page 1 FAVORIT 75011 VIL User manual Dishwasher...
-
Page 2: Table Of Contents
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. -
Page 3: Operating Instructions
Safety information Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. -
Page 4: Installation
Product description • Keep children well away from the dishwasher when the door is open. Installation • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. • All packaging must be removed before use. •... -
Page 5: Control Panel
Control panel Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm This dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher's door occurs. Internal light is equipped with led lamp CLASS 1 in accordance with EN 60825-1: 1994 + A1: 2002 + A2: 2001. -
Page 6: Setting Mode
Control panel Indicator lights Rinse aid Illuminates when the rinse aid has run out. 1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary. The digital display indicates: •... -
Page 7: Audible Signals
First use Audible signals Audible signals have been introduced to help indicate which operations the appliance is performing: • setting the water softener • end of the programme • intervention of an alarm due to malfunction. Factory setting: audible signals activated. It is possible to deactivate the audible signals, using the function buttons. -
Page 8: Setting Manually
Setting the water softener Water hardness Adjusting the water hardness Use of salt setting Clarke °TH mmol/l manually electronically 64 - 88 91 - 125 9,1 - 12,5 level 10 53 - 63 76 - 90 7,6 - 8,9 level 9 46 - 52 65 - 75 6,51 - 7,5... -
Page 9: Use Of Dishwasher Salt
Use of dishwasher salt 4. To change the level, press button A . Each time the button is pressed the level changes (for the selection of the new level see the chart). Examples: if the current level is 5, by pressing button A once, level 6 is selected. if the current level is 10, by pressing button A once, level 1 is selected. -
Page 10: Adjusting The Dosage Of Rinse Aid
Use of rinse aid 1. Open the container by pressing the release button (A). 2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting. -
Page 11: Daily Use
Daily use Daily use • Check if it's necessary to refill with dishwasher salt or rinse aid. • Load cutlery and dishes into the dishwasher. • Fill with dishwasher detergent. • Select a wash programme suitable for the cutlery and dishes. •... -
Page 12: The Lower Basket
Loading cutlery and dishes The lower basket Load larger and heavily soiled dishes and pans in the lower basket. To make it easier to load larger dishes, all rear plate racks in the lower basket can be folded down. The cutlery basket WARNING! Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery tray or in the upper basket because of the risk of injury. - Page 13 Loading cutlery and dishes 1. Place the grid insert on the cutlery basket. 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The cutlery basket can be opened out.
-
Page 14: The Upper Basket
Loading cutlery and dishes The upper basket Load smaller, fragile crockery and long, sharp cut- lery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. •... -
Page 15: Adjusting The Height Of The Upper Basket
Use of detergent • The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the upper basket. Spikes folded away: more room for serving dishes. -
Page 16: Fill With Detergent
Use of detergent Fill with detergent 1. Open the lid. 2. Fill the detergent dispenser (1) with deter- gent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an ad- ditional detergent dose (5/10 g) that must be placed in the prewash detergent cham- ber (2). -
Page 17: Multitab Function
Multitab function Multitab function This appliance is equipped with the "Multitab function", that allows the use of the "Multitab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1"... -
Page 18: Washing Programmes
Washing programmes If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multitab function". 2. Fill up the salt container and the rinse aid dispenser again. 3. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. -
Page 19: Select And Start A Washing Programme
Select and start a washing programme Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. -
Page 20: Unloading The Dishwasher
Unloading the dishwasher End of the washing programme • The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. • When the washing programme has ended, the optical signal on the floor beneath the dishwasher's door will turn off. -
Page 21: Cleaning The Spray Arms
Care and cleaning 2. The dishwasher filter system comprises a coarse filter ( A ), a microfilter ( B ) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove the filter system. 3. Turn the handle about 1/4 a turn anti- clockwise and remove the filter system. -
Page 22: External Cleaning
What to do if… If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. - Page 23 What to do if… Fault code and malfunction Possible cause and solution • continuous flashing of the light of the run- • The water tap is blocked or furred with lime- ning programme scale. • point-shaped optical signal is flashing Clean the water tap.
-
Page 24: Technical Data
Technical data PNC :......S.N. : ......The wash results are not satisfactory The dishes are not clean •... -
Page 25: Installation Instructions
Installation Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or work surface. -
Page 26: Water Inlet Hose With Safety Valve
Water connection The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible). -
Page 27: Electrical Connection
Electrical connection The waste connection must be at a maximum height of 60 cm from the bottom of the dish- washer. The drain hose can face either to the right or left of the dishwasher. Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. -
Page 28: Environment Concerns
Environment concerns Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. - Page 32 To buy accessories, consumables and spare parts at our online shop please visit: www.aeg- electrolux.co.uk...