Creating (Or Editing) A Flight Plan In Pan Mode - Garmin GTN 725 Cockpit Reference Manual

Creating (or Editing) a Flight Plan in Pan Mode

While in Pan Mode, touch the Graphically Edit FPL key to add/remove
waypoints and/or alter a course line in an existing flight plan. You can also
enter or edit an existing flight plan by touching the Flight Plan key on the
home page. See the Flight Plan section of this guide.
NOTE: It is not possible to graphically add an intermediate waypoint
between the current position and a direct-to waypoint unless that waypoint
is in the flight plan. Garmin recommends deleting any flight plan prior to
graphically editing a direct-to waypoint.
On the Map page, enter Pan Mode by touching the screen. Touch the
Graphically Edit FPL key. Touch any waypoint that you want to be part of
your flight plan. You also can touch and drag a flight plan line to a waypoint.
Should you make an error, touch the Undo key. The Undo key will reverse up
to the last nine consecutive edits. When finished, touch the Done key to save
your changes. Touch Cancel to leave the page without making any changes to
the flight plan.
Touch to exit
page without
changes to
flight plan.
190-01007-04 Rev. D
Edit Flight Plan
Flight Plan on Map Page
GTN 725/750 Cockpit Reference Guide (CRG)
17