Setting Up Idp For A Mail Server - D-Link NetDefend DFL-210 User Manual

Network security firewall
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

6.5.8. SMTP Log Receiver for IDP
Events
gw-world:/examplerule> set IDPRuleAction 1 LogEnabled=Yes
Web Interface
Adding an SMTP log receiver:
1.
Go to System > Log and Event Receivers > Add > SMTP Event Receiver
2.
Now enter:
Name: smtp4IDP
SMTP Server: smtp-server
Server Port: 25
Specify alternative email addresses (up to 3)
Sender: hostmaster
Subject: Log event from NetDefendOS
Minimum Repeat Delay: 600
Hold Time: 120
Log Threshold: 2
Click OK
IDP Rules:
1.
Go to IDP > IDP Rules
2.
Select a rule in the grid, right click and choose Edit
3.
Select the action you wish to log and choose Edit
4.
Check the Enable logging checkbox in the Log Settings tab
5.
Click OK
Example 6.21. Setting up IDP for a Mail Server
The following example details the steps needed to set up IDP for a simple scenario where a mail server is
exposed to the Internet on the DMZ network with a public IP address. The public Internet can be reached through
the firewall on the WAN interface as illustrated below.
273
Chapter 6. Security Mechanisms

Advertisement

Table of Contents
loading

Table of Contents