Download Print this page
Honeywell T7771A Product Data

Honeywell T7771A Product Data

Remote temperature sensor

Advertisement

Quick Links

GENERAL
The T7771A Remote Temperature Sensors are direct wired
wall modules for use with the Honeywell T7350 Commercial
Programmable Thermostat. The T7771A has a space
temperature sensor, LED pushbutton setpoint adjustment, and
override with LED.

SPECIFICATIONS

Construction: Two-piece construction, cover and internally
wired subbase. Field wiring 14 to 22 AWG (2.0 to 0.34
sq. mm) connects to a terminal block in the subbase. Wall
module is activated by plugging into prewired subbase.
Mounting Options:
The T7771 can be mounted on a standard two by four inch
junction box or on a 60 mm diameter junction box.
Dimensions (H/W/D):
5-1/16 x 3-1/8 x 1 in. (128 x 80 x 25 mm).
Setpoint Adjustment:
The setpoint offset allows for ±3°F from the programmed
T7350 setpoint.
Environmental Ratings:
Operating Temperature: 45° to 99°F (7° to 37°C).
Shipping Temperature: -40° to 150°F (-40° to 65°C).
® U.S. Registered Trademark
© 2004 Honeywell International Inc.
All Rights Reserved
Remote Temperature Sensor
FEATURES
• Pushbutton setpoint adjustment with LED indicators.
• Occupied/unoccupied override (bypass) with LED.
• L
ON
• Operating range 45 to 99°F (7 to 37°C).
IMPORTANT
Relative Humidity: 5% to 95% noncondensing.
Temperature Sensor Operating Range:
45 to 99°F (10 to 37°C).
Temperature Sensor Accuracy
T7771A 20K Ohm Nonlinearized Sensor:
All T7771 models are furnished with a 20K Ohm nonlinear
NTC temperature sensor that follows a specific
temperature-resistance curve. See Fig. 1.
Sensor accuracy at 77°F is ±0.36°F (±0.2°C)
See form 63-7074 for detailed nominal temperature resistance
output in table form.
NOTE: In addition, a jumper allows for 10K Ohm output to
W
® bus jack.
ORKS
• The T7771 compatibility with the T7350 only applies
to T7350 models with date code 0423 or later.
• To ensure the purchase of a compatible T7350, order
either:
— Y7355B1002 (consisting of: T7350B Thermostat,
T7771A and C7041B Sensors).
— Y7355D1008 (consisting of: T7350D Thermostat,
T7771A, C7041B Sensors).
accommodate using multiple sensors for temperature
averaging applications with the T7350 Commercial
Thermostat. See the Wiring section for details.
T7771A
PRODUCT DATA
63-2617

Advertisement

loading

Summary of Contents for Honeywell T7771A

  • Page 1: Specifications

    • The T7771 compatibility with the T7350 only applies to T7350 models with date code 0423 or later. • To ensure the purchase of a compatible T7350, order The T7771A Remote Temperature Sensors are direct wired either: wall modules for use with the Honeywell T7350 Commercial —...
  • Page 2: Before Installation

    If you have additional questions, need further information, or would like to comment on our products or services, please write or phone: 1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory). 2. Honeywell Customer Care...
  • Page 3 Fig. 5. Mounting wall modules on standard utility Touch only the plastic cover, casing, and buttons. conduit box or 60 mm wall outlet box. Mount the T7771A Wall Module on an inside wall Wiring approximately 54 in. (1372 mm) from the floor (or in the...
  • Page 4 FOR TWO SENSOR TEMPERATURE AVERAGING. M22280 Fig. 7. Temperature averaging with two sensors. When all wiring is complete, attach the cover of the T7771A Wall Module by reversing step 2 of Fig. 2. Automation and Control Solutions ACS Control Products Honeywell International Inc.