Download Print this page
Hasbro Nerf N-Strike LongShot CS-6 61983 Instruction Manual

Hasbro Nerf N-Strike LongShot CS-6 61983 Instruction Manual

Hasbro interactive n-strike longshot cs-6 instruction manual

Advertisement

Quick Links

EXTENSION BLASTER
1. Load dart into lower muzzle.
CLEARING A JAM
1. Pull Bolt Mechanism back. If Bolt
Mechanism seems stuck, try pulling
the trigger first.
3. Open the Jam Clearing Door and
remove the jammed dart. Close door.
© 2006 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
U.S.Patent Nos. 6083127, 5529050 and Patent Pending.
61983
P/N 6594260000
2. Slide the Cocking Mechanism
backwards.
3. Pull the Trigger 1 to launch 1
STREAMLINE DART
2. Remove the Clip before attempting to
remove the jammed dart.
4. Replace Clip and slide Bolt Mechanism
forward. This should load another dart.
Product and colors may vary.
61983
Thank you for purchasing the NERF
blaster. Be sure to read and follow all instructions carefully before
.
using this product.
Use both blasters separately or snap them together to create the
N-Strike LONGSHOT CS-6.
CAUTION:
TO AVOID INJURY:
N-STRIKE LONGSHOT CS-6
Dart's Holding Tube
Cocking
Mechanism
Questions? Call: 1-800-327-8264
N-Strike LongShot CS-6
Do not aim at eyes or face.
Use only darts designed for this product.
Do not modify darts or dart blasters.
WITH 12 STREAMLINE DARTS
Jam
Clearing
Door
Clip Lock Button
Clip
Trigger 2
Bolt Mechanism
Trigger 1
Bipod
AGES 6+
N-Strike
LongShot CS-6
Ready Indicator
Sight
Clip Storage

Advertisement

loading

Summary of Contents for Hasbro Nerf N-Strike LongShot CS-6 61983

  • Page 1 3. Open the Jam Clearing Door and 4. Replace Clip and slide Bolt Mechanism remove the jammed dart. Close door. forward. This should load another dart. © 2006 Hasbro. All Rights Reserved. TM & ® denote U.S. Trademarks. U.S.Patent Nos. 6083127, 5529050 and Patent Pending. 61983 P/N 6594260000 Product and colors may vary.
  • Page 2 N-Strike LONGSHOT CS-6 To Assemble: ™ 1. Insert Bolt into mechanism as shown 2. Stock extends. and plug onto other end of bolt. 3. Slide/snap Sight onto Blaster. Lock 4. Insert grip and slide back to snap into place. into place. 5.