First Steps
Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other users on the Internet, the
fixed network or the mobile phone net-
work, you need the services of a VoIP pro-
vider who supports the VoIP SIP standard.
Precondition: You have registered with a
VoIP provider (e.g. via your PC) and set up
an account.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from your VoIP pro-
vider.
u
Your user name with the VoIP provider,
if this is required by the VoIP provider
u
Your registration name
u
Your password with the VoIP provider
u
VoIP provider general settings
The connection wizard will help you with
the settings.
Starting the connection wizard
Precondition: The base station is con-
nected to the mains power supply and the
router. Your router is connected to the
Internet.
Tip: If VoIP
(IP)
is activated as the default
connection for your phone (default set-
ting page 25), the phone will attempt to
make a direct connection to the server
belonging to your VoIP provider after the
connection wizard is closed. If incorrect/
incomplete information means that the
connection cannot be made, messages
will be displayed (page 11).
Please note:
Your phone is preconfigured for dynamic
assignment of the IP address. In order for your
router to "recognise" the phone, dynamic IP
address assignment (the router's DHCP server)
must also be activated on the router.
Once the handset battery is sufficiently
charged, the message key f on the hand-