Harman Kardon HK 3485 Owner's Manual
  1. Manuals
  2. Brands
  3. Harman Kardon Manuals
  4. Stereo Receiver
  5. HK 3485
  6. Owner's manual

Harman Kardon HK 3485 Owner's Manual

Harman-kardon stereo receiver user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

HK 3485
STEREO RECEIVER
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Harman Kardon HK 3485

Summary of Contents for Harman Kardon HK 3485

  • Page 1 HK 3485 STEREO RECEIVER OWNER’S MANUAL...

  • Page 2: Safety Information

    SAFETY INFORMATION 1. Read Instructions. All the safety and operating instruc- tions should be read before the product is operated. 2. Retain Instructions. The safety and operating instruc- tions should be retained for future reference. 3. Heed Warnings. All warnings on the product and in the operating instructions should be adhered to.

  • Page 3: Important Safety Information

    • Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them. • Due to the weight of the HK 3485 and the heat generated by the amplifiers, there is the remote possibility that the rubber padding on the bottom of the SAFETY INFORMATION unit’s feet may leave marks on certain wood or veneer materials.
  • Page 4 NOTES...

  • Page 5: Table Of Contents

    Step Six – Connect the Remote IR Input and Output (Optional) Step Seven – Connect Optional External Equipment Step Eight – Plug In AC Power Step Nine - Insert Batteries in Remote Step Ten - Turn On the HK 3485 OPERATION Turning On the HK 3485 Sleep Timer...

  • Page 6: Introduction

    If high-performance audio reproduction weren’t enough, we’ve added composite video switching. Use the included audio/video cable to connect your iPod (not included) or other portable players to the HK 3485, or HK 3485 Stereo Receiver Audio Section •...

  • Page 7: Front-Panel Controls

    Speaker 1/2: Press the left side of this button to enable the HK 3485 to output audio to the speakers connected to the Speaker 1 Outputs, and press the right side of the button to enable the Speaker 2 Outputs. You may enable or disable both sets of speaker outputs simul- taneously.

  • Page 9: Front-Panel Information Display

    Auto Indicator: mode is in use. Mute Indicator: HK 3485’s output has been silenced by pressing the Mute Button. Press the button again to end muting. Memory Preset Sleep PHONO VID 1...

  • Page 10: Rear-Panel Connections

    CD or Tape, is selected. Remote Infrared (IR) Input and Output: IR receiver on the front panel is blocked, such as when the HK 3485 is placed inside a cabinet, connect an optional IR receiver to the Remote IR Input jack for use with the remote control.

  • Page 12: Remote Control Functions

    Harman Kardon DVD and CD players. Enter: This button has no effect on the HK 3485, but is used as the Enter key for compatible Harman Kardon DVD players, or the Random Play Button for compatible Harman Kardon CD players.
  • Page 13 To start the process, make sure the FM tuner has been selected as the source. Press and hold this button. The Memory and Preset Indicators will flash as the HK 3485 tuner scans through all FM stations with accept- able signal quality and programs them into the presets. If there are fewer...

  • Page 14: Connections

    MP3 player. Although the tuner is built into the HK 3485, it also counts as a source, even though no external connec- tions are needed, other than the FM and AM antennas.

  • Page 15: Video Connections

    Composite video is the basic connection most commonly available, and is the only type of video connection available with the HK 3485. The jack is usually color-coded yellow, and looks like an analog audio jack, although it is important never to confuse the two. Do not plug a com- posite video cable into an analog audio jack, and vice versa.

  • Page 16: Speaker Placement

    SPEAKER PLACEMENT Before you begin to connect cables, it is important to set up your speakers in their correct locations in the room. Optimally, the front left and right speakers are placed the same distance from each other as from the listening position, or about 60 degrees apart, and angled toward the listener.

  • Page 17: Installation

    Thus, you have the option of connecting each jack to the line-level input on a separate subwoofer. If you have only one subwoofer with a single line-level input, connect it to the right Subwoofer Output on the HK 3485. See Figure 10. Consult the manufacturer’s guide for the subwoofer for additional information.
  • Page 18 Remember to connect the audio and video output jacks on your recorder to the Video 1 Input jacks on the HK 3485, and the audio and video input jacks on your recorder to the Video 1 Output jacks on the...

  • Page 19: Step Five - Connect The Video Display

    Harman Kardon AVR Series audio/video receiver. However, we hope you will find that using a DVD player with the HK 3485 in smaller settings, such as a bedroom or den, surpasses the audio performance of most televisions, including those with onboard stereo speakers.

  • Page 20: Step Seven - Connect Optional External Equipment

    AC power cord into a working outlet. You may plug two devices into the AC Switched Accessory Outlets on the rear of the HK 3485. See Figure 21. Make sure each device draws no more than 100 watts. The devices should have their mechanical or master power switches turned on, and they will power on any time the HK 3485 is turned on.

  • Page 21: Operation

    If the Power Indicator remains red when you plug in the HK 3485 and try to turn it on again, then bring the receiver to an authorized Harman Kardon service center for assistance.

  • Page 22: Headphones

    Figure 31 – Headphone Jack Speaker 1/2 The HK 3485 may be used with up to two pairs of speakers for addi- tional sound power in the main listening room, or if you wish to place the second pair of speakers in another room, or even outdoors (when you select weather-resistant loudspeakers).

  • Page 23: Recording

    4. In Manual Tuning mode, with each press of the Tuning Buttons the HK 3485 will tune the next frequency increment (0.1MHz for FM, or 10kHz for AM) in the selected direction. 5. Press the Preset Scan (P. Scan) Button on the front panel or remote to scan through the previously programmed preset stations.

  • Page 24: Dim Function

    Processor Reset If you wish to fully reset the HK 3485 to its factory defaults, or if it behaves erratically after a power surge, first turn the Master Power Switch off and unplug the AC power cord for at least three minutes. Plug the cord back in and turn the receiver back on.

  • Page 25: Troubleshooting Guide

    • Audio-only source selected In addition to the items shown above, additional information on troubleshooting possible problems with your HK 3485, or on installation-related issues, may be found in the list of “Frequently Asked Questions,” which is located in the Product Support section of our Web site at www.harmankardon.com.

  • Page 26: Technical Specifications

    HK 3485 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode: Continuous Average Power (FTC): 120 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms 150 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms...

  • Page 27: Appendix

    CDR Select Volume Up Volume Up Volume Up Volume Down Volume Down Volume Down APPENDIX CD Player/Changer Controls HK 3485 Controls HK 3485 Control Codes Tuner Only Tuner Only System Power On System Power On System Power On System Power Off...
  • Page 28 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2007 Harman International Industries, Incorporated. All rights reserved. Part No. CQX1A1187Z...

Table of Contents