Indesit IWD 71451 K Instructions For Use Manual

Indesit IWD 71451 K Instructions For Use Manual

Washing machine

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Indesit IWD 71451 K

  • Page 1: Table Of Contents

    Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal IWD 71451 K Description of the washing machine and starting a wash cycle, 8-9 Control panel Indicator lights Starting a wash cycle...
  • Page 2: Installation

    Installation ! Keep this instruction manual in a safe place for Levelling your appliance correctly will provide it future reference. Should the appliance be sold, tran- with stability and avoid any vibrations, noise and sferred or moved, make sure the instruction manual shifting during operation.
  • Page 3: Connecting The Drain Hose

    Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate fixed on Connect the drain the machine. hose, without bending it, to a draining duct or • the socket is compatible with the washing a wall drain situated machine’s plug.
  • Page 4: The First Wash Cycle

    If you are in any doubt regarding the electrical Technical data supply to your machine, consult a qualified electrician before use. Model IWD 71451 K How to connect an alternative plug: The wires in this mains lead are coloured in width 59.5 cm accordance with the following code:...
  • Page 6: Care And Maintenance

    Care and maintenance Cutting off the water and electri- 2. unscrew the lid city supplies by rotating it anti- clockwise (see figu- • Turn off the water tap after every wash cycle. re): a little water may This will limit wear on the hydraulic system trickle out.
  • Page 7: Precautions And Tips

    Precautions and tips Consumers should contact their local authority or This washing machine was designed and constructed in retailer for information concerning the correct accordance with international safety regulations. The fol- disposal of their old appliance. lowing information is provided for safety reasons and must therefore be read carefully.
  • Page 8: Description Of The Washing Machine And Starting A Wash Cycle

    Description of the washing machine and starting a wash cycle Control panel WASH CYCLE DELAY TIMER PROGRESS button START/ FUNCTION DISPLAY PAUSE ON/OFF button buttons with button with indicator lights indicator light TEMPERATURE DOOR LOCKED knob Detergent dispenser drawer indicator light WASH CYCLE SPIN SPEED knob...
  • Page 9: Indicator Lights

    Indicator lights Door locked indicator light When the indicator light is on, the porthole door is locked The indicator lights provide important information. to prevent it from being opened; make sure the indicator This is what they can tell you: light is off before opening the door (wait approximately 3 minutes).
  • Page 10: Wash Cycles

    Wash cycles Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) Fabric Wash softener Daily White Cotton: extremely soiled whites. 90° 1400 2.16 160’   Cotton Standard (1): heavily soiled whites and resistant colours. 60°...
  • Page 11: Personalisation

    Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
  • Page 12: Detergents And Laundry

    Detergents and laundry Detergent dispenser drawer Garments requiring special care Outwear (wash cycle 9): is studied for washing water- Good washing results also depend on the correct dose of repellent fabrics and winter jackets (e.g. Gore-Tex, polyester, detergent: adding too much detergent will not necessa- nylon);...
  • Page 13: Troubleshooting

    Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •...
  • Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
  • Page 15: Assistance

    We have a dedicated team who can provide free advice and assistance with your appliance if you experience any technical difficulties within the first 90 days of ownership. Simply call our Indesit Service Hotline on 08448 224 224 (Republic of...
  • Page 16: After Sales Service

    195113488.01 09/2013 - Xerox Fabriano After Sales Service No one is better placed to care for your Indesit appliance during the course of its working life than us - the manufacturer. Essential Contact Information Indesit Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service.

This manual is also suitable for:

Iwsd 61251Iwsd 51251Iwd 71251

Table of Contents