Page 1
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your cordless impact driver properly and only for what it is intended, you will enjoy years of safe, reliable service. Thank you again for buying Ryobi tools.
THANK YOU FOR BUYING A RYOBI PRODUCT. SPECIFICATIONS To ensure your safety and satisfaction, carefully read through Bit shank size 1/4” (6.35 mm) this OWNER’S MANUAL and the SAFETY INSTRUCTIONS M4 - M10 screws Driving capacity before using the product.
The battery and charger are specifically designed for use in NOTE! conjunction with one another. Charging should be performed When fastening a screw smaller than M6, check the exclusively with a RYOBI fast charger. fastening torque and fastening time. (Fig. 5) X-axis (abscissa) : Fastening time (Second) CHARGER...
MAINTENANCE After use, check the tool to make sure that it is in top condition. RED LIGHT "ON" It is recommended that you take this tool to a RYOBI Authorized INDICATES FAST YELLOW AND GREEN LIGHTS "ON" Service Centre for a thorough cleaning and lubrication at least...
Page 6
RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 503 Mt Wellington Highway, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.