Table of Contents
Advertisement
Front Panel Information Display
X
A
B
C
A Bitstream Indicators
B Dolby Digital Indicator
C Coaxial Source Indicators
D Analog Dolby Surround Mode Indicators
E Optical Source Indicators
F Analog Input Indicator
G Hall Mode Indicators
H VMAx Mode Indicator
A Bitstream™ Indicators: When the selected
input is a digital source, one of these indicators will
light to display the specific type of signal in use.
B Dolby Digital Indicator: This indicator
illuminates when a Dolby Digital source is being
played.
C Coaxial Source Indicators: These indica-
tors light to show when one of the two Coaxial
Digital Inputs has been selected.
D Analog Dolby Surround Mode
Indicators: These indicators illuminate when
one of the analog (matrix) Dolby Surround
modes is in use.
E Optical Source Indicators: These indica-
tors light to show when one of the two Optical
Digital Inputs has been selected.
F Analog Input Indicator: This indicator
lights when an analog input source has been
selected.
G Hall Mode Indicators: These indicators
light when one of the Hall modes has been
selected.
H VMAx Mode Indicator: This indicator illu-
minates to show that the VMAx mode is in use.
I Theater Mode Indicator: This indicator illu-
minates to show that the Theater mode is in use.
J Logic 7 Mode Indicators: These indica-
tors illuminate when the Logic 7 mode is in
use. LOGIC 7C appears for the Cinema ver-
W
D
E
F
G H I
I Theater Mode Indicator
J Logic 7 Mode Indicators
K DTS Mode Indicator
L Preset Number/Sleep Timer
M OSD Indicator
N Night Mode Indicator
O Multiroom Indicator
P Speaker/Channel Input Indicators
sion of Logic 7, LOGIC 7M appears for the
Music version of Logic 7.
K DTS Mode Indicator: This indicator illumi-
nates when a DTS-encoded source is playing.
L Preset Number/Sleep Timer: When the
tuner is in use, these numbers indicate the spe-
cific preset memory location in use. (See page
29 for more information on preset stations.)
When the Sleep function is in use, these num-
bers show how many minutes remain before
the unit goes into the Standby mode.
M OSD Indicator: When the OSD system is in
use, this indicator lights to remind you that the
other indicators in this display do not function
when the On Screen Display is being used.
N Night Mode Indicator: This indicator
lights when the AVR 7000 is in the Night mode,
which preserves the dynamic range of digital
program material at low volume levels.
O Multiroom Indicator: This indicator lights
when the multiroom system is active. Note that
it will remain lit when the multiroom system is
in use even though the main room system is in
the Standby mode and all other indicators are
dark. (See page 33 for more information on the
Multiroom system.)
P Speaker/Channel Input Indicators: These
indicators are multipurpose, indicating either the
speaker type selected for each channel or the
incoming data-signal configuration. The left,
center, right, right surround and left surround
V
U
T
R
S
J
K
L
Q Sleep Indicator
R Preset Indicator
S Memory Indicator
T Stereo Indicator
U Tuned Indicator
V Auto Indicator
W Main Information Display
X Mute Indicator
speaker indicators are composed of three boxes,
while the subwoofer is a single box. The center
box lights when a "Small" speaker is selected,
and the two outer boxes light when "Large"
speakers are selected. When none of the boxes
are lit for the center, surround or subwoofer
channels, no speaker has been selected for that
position. (See page 22 for more information on
configuring speakers.) The letters inside each of
the center boxes display active input channels.
For standard analog inputs, only the L and R will
light, indicating a stereo input. When a digital
source is playing, the indicators will light to dis-
play the channels begin received at the digital
input. When the letters flash, the digital input
has been interrupted. See page 28 for more
information on the Channel Indicators.
Q Sleep Indicator: This indicator lights when
the Sleep function is in use. The numbers in the
Preset/Sleep Number Indicators will show the
minutes remaining before the AVR 7000 goes
into the Standby mode. (See page 25 for more
information on the Sleep function.)
R Preset Indicator: This indicator lights
when the tuner in use to show that the Preset
Number/Sleep Timer L is showing the sta-
tion's preset memory number. (See page 29 for
more information on tuner presets.)
S Memory Indicator: This indicator flashes
when entering presets and other information
into the tuner's memory.
7 FRONT PANEL INFORMATION DISPLAY
Q
P
M
N
O
Hide quick links:
Advertisement
Table of Contents
