Advertisement
Quick Links
COLONY OVAL™ COUNTERTOP SINK
• Acid-resisting enamel steel
• Front overflow
• Self-rimming with cutout template supplied
• Two soap depressions
• Mounting clamps supplied
❏
3004.207 Faucet holes on 4" (102mm) centers
Nominal Dimensions:
508 x 432mm
(20" x 17")
Bowl sizes:
381mm (15") wide
279mm (11") front to back
152mm (6") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4M for Enameled Steel
Plumbing Fixtures
To Be Specified:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
OPTIONAL
64mm
(2-1/2)
181mm
(7-1/8)
432mm
(17)
508mm
(20)
6mm
(1/4)
184mm
(7-1/4)
*
330mm
(13)
178mm
(7)
COUNTERTOP
21mm
(13/16)
MAX.
LUG AND
SCREW
ASSEMBLY
CLAMPING DETAIL
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.4.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J58
COLONY OVAL™
COUNTERTOP SINK
ENAMELED STEEL
(1-1/4) 32mm
DIA. HOLE
(2) 29mm(1-1/8)
HOLES
SOAP DEPRESSIONS
102mm
(4)
(4) RETAINERS FOR
MOUNTING LUGS
COUNTERTOP
(BY OTHERS)
*
254mm
(10)
203mm
FINISHED
(8)
SUPPLIES AS REQ'D
1-1/4 O.D. WASTE
1-1/4 O.D. TAILPIECE
FINISHED
FLOOR
Revised 2/08
FINISHED WALL
OR SPLASHBACK
787mm
(31) TO
FLOOR
Advertisement
