Page 1
LC - 20AD5E LC - 20AD5S LC - 26AD5E LC - 26AD5S LC - 32AD5E LC - 32AD5S LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUALE DI ISTRUZIONI...
Page 2
SPECIAL NOTE FOR USERS IN THE UK The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
“AA” size battery (×2) ...Page 5 • Operation manual (This publication) This optional cable clamp comes with LC-26AD5E, LC-26AD5S, LC-32AD5E and LC-32AD5S models only. The stand unit is not supplied for the LC-20AD5E or LC-20AD5S model. The stand unit is attached before shipment.
Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions •...
Removing the covering sheet For protection, sheets , are covering the product. Please remove these sheets before use. ( : LC-20AD5E, LC-20AD5S Black models only / , : Black models only) Remove each sheet. Tear from the cut point and...
Setting the TV on the wall • This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 33.) The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Quick guide Inserting the batteries Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries. Open the battery cover.
Quick guide Remote control unit (Standby/On) 5 P ( Enter standby mode or turn on the TV/DTV: Select the channel. power. (See page 8.) External: Switch to TV or DTV input mode. DTV/RADIO* Teletext: Move to the next/previous DTV: Switch between RADIO and page.
Quick guide Setting your country or area TV (Front view) Press ◀/▶ to select your country or area listed from “First installation (Country)”. Remote control sensor • You can change “Colour system” and “Sound system” only when “Other count.” is selected in “Country”.
VIDEO S-VIDEO NOTE S-video cable* AV OUTPUT • For LC-20AD5E, LC-20AD5S: EXT6 is for connecting a EXT 3 PC (see page 10). • When connecting an HDMI-DVI conversion adapter/ cable to the HDMI terminal, the image may not come in clearly.
EXT 7 ø 3.5 mm stereo minijack cable* RGB/DVI conversion cable* NOTE • For LC-20AD5E, LC-20AD5S: EXT6 is for connecting a • The PC input terminals are DDC1/2B-compatible. • Refer to page 30 for a list of PC signals compatible with the TV.
Menu operations Menu operation buttons On-Screen Display Example Use the following buttons on the remote control unit to operate the menu. ① ② ③ ④ ⑤ Picture menu ① • To adjust the picture settings. Audio menu ② • To adjust the audio settings. Setup menu ③...
Menu operations Common operations Picture menu Menu Operation: A Press MENU and the MENU screen displays. ① Press ◀/▶ to select the desired menu. ② Press ▲/▼ to select the desired menu item, and ③ then press OK (Example: AV mode, Film mode, etc.).
When you connect the DVI device to the TV with analog audio cords, select this setting. This item is visible only when TV is TV mode. LC-20AD5E, LC-20AD5S: HDMI only. • Select “Reset” to reset all adjustment items to the factory preset values.
Menu operations For the “Loudsp. sound” setting Setup menu • The sound output modes differ depending on whether or not a NICAM or A2 stereo signal is received. (See page For the “Auto vol.” setting • Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements.
Menu operations Programmes TV only Manual adjustment This section describes how to set up analogue TV Individual settings of programmes can be adjusted. channels manually. Selectable Choice/ Press MENU to display the Menu screen. Description items Value range Press ◀/▶ to select “Setup”. Channel 0–99 The channel changes to the higher...
Menu operations To set a Child Lock for individual programmes Child lock Perform steps and 2 in [2] Setting a Child Important: Lock to display the “Child lock” screen. • Please refer to page 34 for “IMPORTANT NOTE ON Press ▲/▼...
Menu operations Option menu 4:3 mode Menu Operation: A (page 2) The WSS signal has 4:3 auto-switching that allows you to select between Normal and Panorama. Selectable Description items Normal Option Settings Normal range keeping 4:3 or 16:9 aspect ratio Panorama Menu Operation: A (page 2) Wide image without side bars...
Useful features WIDE MODE WIDE MODE TV/DTV/AV only PC only You can select the picture size. Selectable picture You can select the picture size. size varies with the type of signal received. You can freeze a motion picture on the screen. Press Selectable •...
Useful features Button functions Using the Programme Table Buttons Description The Programme table shows a list of all receivable programmes. They are located in channels 1 to 99. Increase or decrease the page number. To select the desired programme Colour (Red/ Select a group or block of pages displayed Green/Yellow/ in the coloured brackets at the bottom of the...
DTV menu operations DTV menu operation buttons DTV On-Screen Display Example Use the following buttons on the remote control unit to operate the DTV Menu. Main menu Language Setup ① ② ③ ④ ⑤ ⑥ ⑦ Navigate Language Setup ① •...
DTV menu operations About using the character set screen Press ◀/▶ to select a desired language for each item. In some cases you may be prompted to enter Press END or OK. characters. See below for details. Sample Alpha Numerical Character Set screen NOTE •...
Page 24
DTV menu operations Fav (Favourite) Skip Assign services to four different favourite groups. Services that are set to skip will not be picked up when pressing P ( Press ▲/▼ to select the desired service. Press ▲/▼ to select the desired service. Press on the remote control.
DTV menu operations Installation Move This section describes how to reconfigure the DTV Sort the order of the selected service by moving the settings after conducting Initial auto installation on service position. page 8. Press ▲/▼ to select the desired service. Auto Scan Press 7 on the remote control.
DTV menu operations Carrier Setup System Configuration This is provided for you to rename (label), delete, Configure On-Screen Display and Child Lock or re-scan carriers. “Carrier” in this context refers settings. to a service station that provides a set of individual services.
DTV menu operations Password Setup (Parental Lock) Software upgrade This function allows TV and Radio services to be The software for controlling the built-in DTV decoder restricted. It prevents children from watching violent can be upgraded when necessary. In Great Britain or sexual scenes that may be harmful.
Interface”. view channels. • The CI module name is displayed. About The Common Interface Slot (LC-20AD5E, LC-20AD5S only) Cl Module Push to eject Press OK to access the CI menu. • Detailed information on the CI card in use is displayed.
Useful features (DTV) About EPG To watch an event currently on-air, press OK. • The “ ” button of Navigation buttons will be With the Electronic Programme Guide (EPG), you displayed as “ ” when the cursor is selecting View an event currently on-air, and other than this will can check the schedule of DTV and Radio events, display “...
Useful features (DTV) Viewing a service banner Changing the start time of the Event Select the start time of the event to change and A service banner shows event names, start/end time press the YELLOW (Edit Timer). of event, and other useful information. Change the start time with ▲/▼...
Useful features (DTV) Using the multi audio function Using the Digital Service (UK only) Change the audio mode and language for the Some services bring you programmes with currently viewed service. the Digital Service, letting you experience DTV interactively. Press when no other menu screen is When provided, the Digital Service will start when displayed.
Appendix Communication procedure PC compatibility chart Send the control commands from the PC via the RS- 232C connector. Horizontal Vertical VESA The TV operates according to the received Resolution Frequency Frequency Standard command and sends a response message to the PC. Do not send multiple commands at the same time.
Page 33
_ CLOCK (0 to 180) A V D EXT1 to EXT7 (1 to 7) C L C K ? ? 0 to 180 For LC-20AD5E, LC- P H S E _ PHASE (0 to 40) 20AD5S: P H S E ?
Appendix Troubleshooting Problem Possible Solution • No power. • Check if you pressed on the TV. (See page 8.) If the indicator on the TV lights up red, press on the remote control unit. • Is the AC cord disconnected? (See page 4.) •...
For LC-20AD5E, LC-20AD5S: Audio input is shared with EXT5 and EXT6. • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
Page 37
Unit: mm LC-20AD5E, LC-20AD5S 445.2 LC-26AD5E, LC-26AD5S 567.5...
Page 39
SHARP ELECTRONICS (Europe) GmbH SHARP ELECTRONICS (Europe) GmbH Sonnistraße 3, D-20097 Hamburg, Deutschland Sonnistraße 3, D-20097 Hamburg, Deutschland Printed on environmentally friendly paper Printed in Poland Auf ökologischem Papier gedruckt Gedruckt in Polen Imprimé sur papier écologique Imprimé en Pologne...