CEN-TECH 92350 Assembly And Operating Instructions

Pocket infrared thermometer with laser

Download this manual

POCKET INFRARED

THERMOMETER WITH LASER

92350

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

this manual or any artwork contained herein may be reproduced in any shape or

form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2: Safety Warnings And Precautions
Read all instructions before using this tool! Keep work area clean. Cluttered areas invite injuries. Observe work area conditions. Do not use the Pocket Thermometer in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
Page 3 When unpacking, check to make sure the parts on page 5 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 4 Point the Pocket Thermometer at the object you wish to measure and press and hold the Thermometer Button on the side. The meter will turn on and display a reading. The reading will remain on 8 seconds after you let go of the Laser Button. The chart below shows the relation between the distance and the size of the area measured.
Page 5: Assembly Drawing
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 92350 For technical questions, please call 1-800-444-3353 Assembly Drawing...