Advertisement
Quick Links
DIGITAL THERMOMETER
92242
ASSEMBLY & OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
Copyright
2004 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts please call 1-800-444-3353.
Advertisement
Related Manuals for CEN-TECH 92242
Summary of Contents for CEN-TECH 92242
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts please call 1-800-444-3353.
- Page 2 HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
- Page 3 When unpacking your Digital Thermometer, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Your Digital Thermometer requires only minor assembly. It is important that you read the entire manual to become familiar with the product BEFORE you assemble and use the Digital Thermometer.
- Page 4 Setting to the Desired Type of Measurement The Thermometer readings can be set to be displayed in Celsius, Fahrenheit or Kelvin. Turn on the Thermometer by pressing the “ON/OFF” Switch located at the top of the Thermometer-see Figure 1. The Thermometer will display a temperature along with a letter showing the present degree setting.
- Page 5 The “HOLD” key is located on the right side of the Thermometer face and is one of the four buttons surrounding the “TYPE” button. Pressing the “HOLD” key will cause the Thermometer to display the present readings. It will display only the present reading and will stop all future measurements-see Figure 1.
- Page 6 Set the end of the Thermocoupler at the place where you desire to measure temperature. Turn the Thermometer “ON.” The Thermometer has a stand which can be pulled out from the back and used to rest the Thermometer for easy reading of display.