Starting The Dvr - Bunker Hill Security 67139 Set Up And Operating Instructions Manual

starting the dvr

1. Once the unit is connected and
plugged in, the Power LED will light
up.
2. Initially, the DVR will boot-up and dis-
play the current version and release
date of the DVR firmware for a few
seconds.
checking hdd......
master [maxtOr stm3250310a]
slave......
3. The DVR will then automatically de-
tect the hard drive and show the hard
drive information.
If there is any problem with the hard
drive, the DVR will display the infor-
mation and will not finish its boot up
program.
SKU 67139 For technical questions, please call 1-800-444-3353.
checking hdd......
master [ maxtOr s tm3250310a]-new-dvr
FOrmat hdd cOnFirm
(select) FOrmat / (menu) cancel?
note: When detecting a new hard drive,
the DVR will prompt you to format the
hard drive.
Press (SEL) to format the new hard
drive, or (MENU) to cancel and enter
the system.
4. After the DVR has finished booting
up, it will enter the mode it is pro-
grammed for, including recording if
it is the scheduled time period for
recording.
rev 10h
Page 12