Central Pneumatic Professional 66222 Set Up And Operating Instructions Manual

Hvlp gravity feed spray gun

Advertisement

Quick Links

HVLP GraVity Feed
Set uP and OPeratinG inStructiOnS
distributed exclusively by Harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS manuaL.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.

SPray Gun

3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
66222
®
.

Advertisement

Table of Contents
loading

Summary of Contents for Central Pneumatic Professional 66222

  • Page 1: Spray Gun

    Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
  • Page 2 WarninG indicates a hazardous situation which, if not avoided, could result in death or serious injury. SKU 66222 For technical questions, please call 1-800-444-3353. cautiOn, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
  • Page 3: Personal Safety

    Do not carry the tool with your finger on the SKU 66222 For technical questions, please call 1-800-444-3353. trigger or connect the tool to the air supply with the trigger on.
  • Page 4: Air Source

    Service tool service must be performed only by qualified repair personnel. SKU 66222 For technical questions, please call 1-800-444-3353. When servicing a tool, use only identical replacement parts. use only authorized parts.
  • Page 5: Symbol Definitions

    It must be under- stood by the operator that common sense and caution are factors which SKU 66222 For technical questions, please call 1-800-444-3353. cannot be built into this product, but must be supplied by the operator.
  • Page 6: Table Of Contents

    When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown throughout the manual as soon as possible. • This air tool may be shipped with a protective plug covering the air inlet.
  • Page 7: Air Supply

    WarninG! tO PreVent SeriOuS injury FrOm accidentaL OPeratiOn: SKU 66222 For technical questions, please call 1-800-444-3353. do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow...
  • Page 8: Read The Entire Important Safety Information

    You will achieve a smoother painted surface with less waste and over- spray than with a conventional air powered spray gun. SKU 66222 For technical questions, please call 1-800-444-3353. Air powered HVLP and conventional spray guns differ from airless spray- ers that are fluid powered.
  • Page 9 The work area must not allow access by children or pets to prevent injury and distraction. SKU 66222 For technical questions, please call 1-800-444-3353. Route the air hose along a safe route to reach the work area without creat- ing a tripping hazard or exposing the air hose to possible damage.
  • Page 10: Air Cap

    Turn the Fluid Control Knob (12) all the way clockwise to turn off paint flow. Using a scrap material, SKU 66222 For technical questions, please call 1-800-444-3353. squeeze the Trigger (36) all the way. With the Trigger squeezed, turn the Fluid Control Knob (12) counterclock- wise to increase paint flow.
  • Page 11 As the water evaporates the bits of paint adhere to each other and form SKU 66222 For technical questions, please call 1-800-444-3353. a paint film. The paint film chemically bonds together.
  • Page 12 Air Inlet (32). Adjust the Air Regulator to 15-45 PSI. Fill the Cup (28) with thinned paint. Remember to pour the paint through SKU 66222 For technical questions, please call 1-800-444-3353. a strainer. Replace the Lid (29) and screw on tightly.
  • Page 13 To clean, use the enclosed brush (33) or a cleaning kit, such as SKU# 99634 available from Harbor Freight Tools. Never use a pin or metal scraper to clean the delicate components of this sprayer. You will damage the sprayer.
  • Page 14 Air pressure set too high. too hard Follow all safety precautions whenever diagnosing or servicing the tool. disconnect air supply before service. SKU 66222 For technical questions, please call 1-800-444-3353. tool troubleshooting Check for loose connections and make sure that air supply is providing enough air flow (CFM) at required pressure (PSI) to the tool’s air inlet.
  • Page 15 Spots on surface with light center (fish eyes) Spots on surface with dark center (contamination) SKU 66222 For technical questions, please call 1-800-444-3353. Paint is applied too thick Incorrect paint volume Insufficient air pressure Paint gun too far from paint...
  • Page 16: Trigger

    Air Inlet Brush Hex Adapter Wrench Trigger Air Regulator Air Pressure Gauge SKU 66222 For technical questions, please call 1-800-444-3353. Q’ty PLeaSe read tHe FOLLOWinG careFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.
  • Page 17: Assembly Diagram

    SKU 66222 For technical questions, please call 1-800-444-3353. Page 17...
  • Page 18 Limited 90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents