Central Pneumatic  46309 Assembly And Operating Instructions Manual

Central Pneumatic 46309 Assembly And Operating Instructions Manual

Contractor series air brad nailer

Advertisement

AIR BRAD NAILER
Model 46309
ASSEMBLY and OPERATING
INSTRUCTIONS
Distributed exclusively by
®
Harbor Freight Tools
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright
2001 by Harbor Freight Tools
. All rights reserved. No portion
©
®
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Manual Revised 11h

Advertisement

Table of Contents
loading

Summary of Contents for Central Pneumatic CENTRAL PNEUMATIC 46309

  • Page 1 . All rights reserved. No portion © ® of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Manual Revised 11h...
  • Page 2: Specifications

    Safety Feature Dimensions Accessories Fasteners available from Harbor Freight Tools: SKU 33205-3/4”, SKU 33206-1”, SKU 33207-1-3/16”, 91221-2”. You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual.
  • Page 3 Use eye and ear protection. Always wear ANSI approved impact safety goggles and appropriate hearing protection. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
  • Page 4 trip or your panel fuse to break. If this happens, either use the compressor without an extension cord or find a larger amperage circuit to use. 19. Maintenance. The maintenance outlined in the maintenance section should be performed regularly. For your safety, this product should be serviced or repaired regularly only by a qualified technician.
  • Page 5: Operation

    Note: To connect this tool, we recommend a quick coupler/adapter (not included). Coupler/ adapters are available at Harbor Freight Tools. If an automatic oiler is not used, put 3-5 drops of pneumatic tool oil in the Air Inlet (38) before each use.
  • Page 6: Operating Nailer

    FIGURE 1 Safety ALWAYS WEAR ANSI APPROVED IMPACT SAFETY GOGGLES WHEN RELOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL. Other people in the work area must also wear ANSI approved impact safety goggles. Warning! Make sure the Nailer is not attached to the air hose whenever loading the tool.
  • Page 7: Clearing Jams

    Anytime any maintenance or repairs are done (including clearing jams), FIRST: Disconnect the Nailer from the air hose. Empty the Magazine (60) completely. Attempt to fire the Nailer into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any brads.
  • Page 8: Troubleshooting Guide

    Anytime any maintenance or repairs are done, FIRST: Disconnect the Nailer from the air hose. Empty the Magazine (60) completely. Attempt to fire the Nailer into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any brads. Always leave the Magazine (60) open during maintenance.
  • Page 9: Parts List

    Part Description Exhaust Screw Washer Cylinder Cap Assembly Seal Air Compression Spring Gasket O-ring O-ring Head Valve Piston O-Ring Stopper Collar O-ring O-ring Cylinder Bumper Body Nozzle Cover Trigger Axle Head Spring O-Ring PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM AND TROUBLESHOOTING GUIDE IN THIS MANUAL AS A REFERENCE TOOL ONLY.
  • Page 10: Assembly Drawing

    REV 04/05 SKU 46309 For technical questions, please call 1-800-444-3353. Page 10...
  • Page 11 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents