Table of Contents
Advertisement
grOunDing instructiOns
anD Death FrOM incOrrect
grOunDing Wire
cOnnectiOn
reaD anD FOllOW these
instructiOns:
110-120 V~ grounded tools: tools
with three Prong Plugs
1.
In the event of a malfunction or
breakdown, grounding provides a path
of least resistance for electric current
to reduce the risk of electric shock.
This tool is equipped with an electric
cord having an equipment-grounding
conductor and a grounding plug. The
plug must be plugged into a matching
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances.
2.
Do not modify the plug provided – if it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
3.
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. The conductor with
insulation having an outer surface that
is green with or without yellow stripes is
the equipment-grounding conductor. If
repair or replacement of the electric cord
or plug is necessary, do not connect the
equipment-grounding conductor to a live
terminal.
Check with a qualified electrician or
4.
service personnel if the grounding
instructions are not completely
understood, or if in doubt as to whether
the tool is properly grounded.
5.
Use only 3-wire extension cords that
have 3-prong grounding plugs and
SKU 44505
tO PreVent
electric shOck
For technical questions, please call 1-800-444-3353.
3-pole receptacles that accept the tool's
plug.
6.
Repair or replace damaged or worn cord
immediately.
grounding
Pin
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 a)
7.
This tool is intended for use on a circuit
that has an outlet that looks like the one
illustrated above in 125 V~ 3-Prong
Plug and Outlet. The tool has a
grounding plug that looks like the plug
illustrated above in 125 V~ 3-Prong
Plug and Outlet.
8.
The outlet must be properly installed and
grounded in accordance with all codes
and ordinances.
9.
Do not use an adapter to connect this
tool to a different outlet.
Drill Press safety Warnings
For Your Own safety read instruction
Manual before Operating Drill Press
1.
Wear eye protection.
2.
Do not wear gloves, necktie, or loose
clothing.
3.
Clamp workpiece or brace against
column to prevent rotation.
4.
Use recommended speed for drill
accessory and workpiece material.
Page 5
Hide quick links:
Advertisement
Table of Contents
