1. Manuals
  2. Brands
  3. Samsung Manuals
  4. DVR
  5. Real Time SHR-2041
  6. User manual

Samsung Real Time SHR-2041 User Manual

Real time dvr
Hide thumbs Also See for Real Time SHR-2041:
Table of Contents

Advertisement

Quick Links

Real Time DVR
SHR-2040/2041/2042 User's Manual
English

Advertisement

Table of Contents
loading

Related Manuals for Samsung Real Time SHR-2041

Summary of Contents for Samsung Real Time SHR-2041

  • Page 1 Real Time DVR SHR-2040/2041/2042 User’s Manual English...

  • Page 2: Safety Regulations

    SHR-2040/2041/2042 USER’S MANUAL Safety Regulations Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. Do not use multiple plugs at once. ■ This may cause abnormal heat generation or fire ●...

  • Page 3: Before We Start

    (See CCTV Part of http://www.samsung.com) Before installing any external device such as external memory or HDD, please check the compatibility of the device with Samsung DVR. The list of the compatible devices with Samsung DVR can be obtained from your vendor.

  • Page 4: Table Of Contents

    Contents English Safety Regulations Before we start Standards Approvals Chapter 1 Overview 1. Introduction 2. Features 3. Part Names and Functions Chapter 2 Installation 1. Installation Environment Setup 2. Checking Product & Accessory 3. HDD Addition Chapter 3 Connecting with other device 1.
  • Page 5 Chapter 5 Menu Setup Before Use 1. System 5-14 2. Camera 5-18 3. Monitoring 5-20 4. Recording Mode 5. Event Record Mode 5-22 5-27 6. Schedule 5-29 7. Backup 5-30 8. Network 5-34 9. Network Setup Chapter 6 PTZ Camera Control 1.
  • Page 6 English Chapter 9 Smart Viewer 1. Introduction 2. Feature 3. PC Specification(Recommendation) 4. Smart Viewer Installation 5. Smart Viewer Program Execution 6. Smart Viewer Initial Screen 7. Monitoring Mode 9-23 8. Search Mode 9-30 9. Setup Mode Appendix 10-1 1. Product Specification 10-4 2.

  • Page 7: Chapter 1 Overview

    Chapter 1 Overview...

  • Page 8: Introduction

    SHR-2040/2041/2042 USER’S MANUAL Introduction The Digital Video Recorder(DVR) compresses the 4 channel of camera input data into the MPEG4 video file and the 4 channel of voice input data into the ADPCM audio file in the real time to record them in the Hard Disk or retrieve them from the Hard Disk simultaneously.

  • Page 9: Features

    Features 4 CH Composite Input Connectors ■ NTSC / PAL Video Source Compatible ■ ( NTSC : SHR-2040 / SHR-2041 / SHR2042, SHR-2040N / SHR-2041N / SHR-2042N : SHR-2040P / SHR-2041P / SHR2042P ) Able to record the CIF sized (NTSC-352 x 240 / PAL-352 x 288) video at the speed of ■...

  • Page 10: Part Names And Functions

    SHR-2040/2041/2042 USER’S MANUAL Part Names and Functions English [SHR-2040] Name Power LED Displays power on/off condition. Alarm LED lights on when an event occurs. HDD Access Displays Normal Access to HDD. Upon Access to HDD, LED repeats on and off. Network LED Displays both network connection and data transmission conditions.
  • Page 11 Name PTZ Button ZOOM ZOOM(TELE) Button TELE FREEZE FREEZE(WIDE) Button WIDE SEARCH SEARCH(VIEW) Button VIEW MENU MENU (PRESET) Button PRESET RECORD Search Function Direction Button USB Port Function Performs the TELE, WIDE, PRESET, and VIEW function. Sets up Digital Zoom(x2). ( Performs the TELE function by pressing the PTZ button.) Performs the FREEZE function in the DISPLAY Mode.
  • Page 12 SHR-2040/2041/2042 USER’S MANUAL English [SHR-2041] [SHR-2042] Name Power LED Displays power on/off condition. Alarm LED lights on when an event occurs. HDD Access Displays Normal Access to HDD. Upon Access to HDD, LED repeats on and off. Network LED Displays both network connection and data transmission conditions. Displays Back Up Mode.
  • Page 13 Name MODE Mode Selection Button PTZ Button ZOOM ZOOM(TELE) Button TELE FREEZE FREEZE(WIDE) Button WIDE SEARCH SEARCH(VIEW) Button VIEW MENU MENU (PRESET) Button PRESET RECORD Search Function Direction Button USB Port Function Displays 4 split screen. Displays the selected channel to the Single Mode Displays both LIVE Channel and Playback Channel in the PIP Screen simultaneously.
  • Page 14 SHR-2040/2041/2042 USER’S MANUAL Caution Caution Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condition. English [SHR-2040]...
  • Page 15 Caution Caution Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condition. Name VIDEO IN Composite Video Signal Input Port (BNC Style Connector)

  • Page 17: Chapter 2 Installation

    Chapter 2 Installation...

  • Page 18: Installation Environment Setup

    SHR-2040/2041/2042 USER’S MANUAL Installation Environment Setup Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condition. You should pay attention to the following before you use the product.
  • Page 19 (The air intake fan should be equipped with a filter to block dust and other impurities from inflow.) 6. The temperature inside the rack and around the DVR should stay between 0°C and 40°C (32°F and 104°F). English...

  • Page 20: Checking Product & Accessory

    SHR-2040/2041/2042 USER’S MANUAL Checking Product & Accessory Upon delivery of a product, you shall unwrap the product and put it on the even floor or where you want to use it. Then you shall check if the following items are in it. Main Body ■...

  • Page 21: Hdd Addition

    - Power cut or incorrect shutdown whilst the DVR is operating. - Refer to page 5-11 : how to turn off DVR - Moving or causing any impact on the DVR during operation. Please, back up events as soon as possible to minimize disappointment should HDD data be lost.
  • Page 22 SHR-2040/2041/2042 USER’S MANUAL [How to Add a HDD] 1. To remove the product’s cover, take out the screws on the left and right sides (2 spots each) and on the back (3 spots). 2. Remove the cover from the product. (Remove the cover by first lifting its back part upward after sliding the cover slightly backward.) 3.
  • Page 23 4. Remove the bracket-HDD from the product by lifting it upward from the product. 5. Mount the HDD to the bracket-HDD with the SCREW-TAPTITE (BW, +, S, M3, L6, ZPC) (4 spots) that was provided as an accessory. (The screws have to be tightened so that it doesn’t vibrate loose.) 6.
  • Page 24 SHR-2040/2041/2042 USER’S MANUAL 7. Make sure that the bracket-HDD is mounted stably inside the product, then connect the power supply cable and signal transmission cable (IDE cable) to the HDD. 8. Check if there is any problem with connector or wiring inside of the product for connecting and mounting then close the cover.
  • Page 25 [Setting the Jumper] The jumper setting method is illustrated on the surface of the purchased HDD. Using SAMSUNG hard disk, the jumper setting method is as follows: • HDD jumper for Primary Master and Primary Slave. • Jumper setting for Secondary Master and Secondary Slave.
  • Page 26 SHR-2040/2041/2042 USER’S MANUAL 2. Remove the cover from the product. (Remove the cover by first lifting its back part upward after sliding the cover slightly backward.) 3. There is a bracket (bracket-HDD) mounted on the right and left sides where you can mount the HDD, and you have to remove the screws that are holding the bracket that you want to mount an HDD onto.
  • Page 27 4. Remove the bracket-HDD from the product by separating the power supply cable, signal transmission cable (IDE cable), and fan cable then pulling it toward the center of the product to separate its fixed part from the bottom. 5. Mount the HDD to the bracket-HDD with the SCREW-SPECIAL (BWH, 6-32UNC, L10.5) (4 spots) that was provided as an accessory.
  • Page 28 SHR-2040/2041/2042 USER’S MANUAL 6. Re-mount the built-in HDD bracket-HDD to the place where it was separated from. Place the bracket-HDD so that all five mounting spots on the bottom and the bracket-HDD’s mounting holes are perfectly aligned, then slide it toward the outside of the product and tigh ten the screws.
  • Page 29 [Setting the Jumper] The jumper setting method is illustrated on the surface of the purchased HDD. Using SAMSUNG hard disk, the jumper setting method is as follows: • HDD jumper for Primary Master and Primary Slave. • Jumper setting for Secondary Master (CD-RW) and Secondary Slave.
  • Page 30 SHR-2040/2041/2042 USER’S MANUAL 2. Remove the cover from the product. (Remove the cover by first lifting its back part upward after sliding the cover slightly backward.) 3. There is a bracket (bracket-HDD) mounted on the right and left sides where you can mount the HDD, and you have to remove the screws that are holding the bracket that you want to mount an HDD onto.
  • Page 31 4. Remove the bracket-HDD (A) from the product by disconnecting the power supply cable, signal transmission cable (IDE cable), and fan cable then pulling it toward the center of the product to disconnect its fixed part from the bottom. Remove the bracket-HDD (B) by lifting it up after removing the screws.
  • Page 32 SHR-2040/2041/2042 USER’S MANUAL 6. Re-mount the built-in HDD bracket-HDD to the place where it was removed from. Place the bracket-HDD(A) so that all the five fixing areas in the bottom and the bracket-HDD’s fixing holes can perfectly aligned, then slide it outward of the product and tighten the screws.
  • Page 33 8. Check if there is any problem with connector or wiring inside of the product for connecting and mounting then close the cover. 9. Tighten cover mounting screws. (The left and right side each has 5 spots and back side has 1 spot) Caution Caution...
  • Page 34 SHR-2040/2041/2042 USER’S MANUAL WARNING ! Regarding the sub fan, you need additional brackets and sub fans as follows. The sub fan is shaped like this when viewed from the front and back. Please pay attention to the fan direction to let wind go through the fan. @ Fix the fan as follows 2-17 English...
  • Page 35 # Please install the fan which is seen at the right from the front view of SHR-set as follows. $ The cable should be out from the left hole. 2-18 English...

  • Page 37: Chapter 3 Connecting With Other Device

    Chapter 3 Connecting with other device...

  • Page 38: Connecting The Video, Audio, And Monitor

    SHR-2040/2041/2042 USER’S MANUAL Connecting the Video, Audio, and Monitor [SHR-2040] English...
  • Page 39 [SHR-2041/2042] English...

  • Page 40: Connecting The Network

    SHR-2040/2041/2042 USER’S MANUAL Connecting the Network ● Connecting to Internet through Ethernet(10/100BaseT) ● Connecting to Internet through ADSL English [SHR-2040] [SHR-2040]...
  • Page 41 ● Connecting to Internet through Ethernet(10/100BaseT) [SHR-2041/2042] ● Connecting to Internet through ADSL [SHR-2041/2042] English...

  • Page 42: Connecting The Usb

    SHR-2040/2041/2042 USER’S MANUAL Connecting the USB 1. There are two USB connecting ports on the front and back of SHR-2040/2041/2042. 2. USB Hard Disk, USB CD/DVD, and USB Memory are connected through the front and back ports of SHR-2040/2041/2042. 3. Only one USB device can be connected with each USB connecting port. 4.

  • Page 43: Connecting The Alarm Input/Output

    Connecting the Alarm Input/Output The Alarm IN/OUT port in the back of SHR-2040/2041/2042 is composed of the following elements. ● ALARM IN/OUT Connection - ALARM IN1 - ALARM IN2 - ALARM IN3 - ALARM IN4 - ALARM RESET IN - ALARM OUT1 - ALARM OUT2 Name ALARM Input Port...
  • Page 44 SHR-2040/2041/2042 USER’S MANUAL ● ALARM IN/OUT Connection English...

  • Page 45: Connecting The Rs-485 Device

    Connecting the RS-485 Device ● Connect the RS-485 Device through the back port of SHR- SHR-2040/2041/2042. ● You can install and control the PTZ camera supporting the RS-485 communication. ● You can adopt either Half Duplex or Full Duplex method for the connection. ●...

  • Page 47: Chapter 4 Live

    Chapter 4 Live...

  • Page 48: System Operation

    SHR-2040/2041/2042 USER’S MANUAL System Operation ● Turn the power on and the following LOGO pops up on the screen. ● After the LOGO appears, all of LED in the front flickers 6 times to initialize the system for operation. ● Upon completion of normal initialization, the Live screen appears accompanying a beep sound.

  • Page 49: Live Screen Mode

    - Large : Full D1 - (NTSC) 720X480 (PAL) 720X576 - Normal : Half D1 - (NTSC) 720X240 (PAL) 720X288 - CIF : CIF - (NTSC) 352X240 (PAL) 352X288 (Full D1 is supported only when “1 CH DVR support”) English...
  • Page 50 SHR-2040/2041/2042 USER’S MANUAL : Auto sequence Icon This icon appears in the auto sequence mode. : Backup Playback Icon This icon appears when the backup data is played. : Fan Error Icon This icon appears when the fan stops. : No HDD icon This icon appears when there is a dysfunctional hard disk.

  • Page 51: Selecting Live Screen Mode

    Selecting Live Screen Mode Each mode may be selected by [MODE Button] and [CH1 ~ CH4 Button]. The following figure shows Live Mode after converted. ● The default setup is 4 Split Screen Mode. ● You are able to choose other modes than Full Screen Mode by the [MODE] button in sequence.

  • Page 52: Live Channel Selection And Audio On/Off Setup

    SHR-2040/2041/2042 USER’S MANUAL Live Channel Selection and Audio On/Off Setup In other split modes than Full Screen Mode and Auto Sequence Mode, you can choose a channel to be displayed in each split area on your own. In addition, the channel being set to Audio On can be set to Audio On/Off in all Live Modes.

  • Page 53: Zoom Function

    Freeze and Zoom Freeze Function Freeze function pauses the video image in the Live Screen, it is only available in the Live Mode. You can set freeze to on or off with the [FREEZE] button. Zoom Function Zoom function enlarges the selected area to double size, and it is only available in the single mode.

  • Page 54: Event Monitoring

    SHR-2040/2041/2042 USER’S MANUAL Event Monitoring Event monitoring displays the channel synchronized with a event on the screen when a special event (Sensor/Motion/Video Loss) occurs. Event monitoring On/Off and event duration setup is available in [Menu] ➝ [Monitoring] mode. If you set the event monitoring interval to 5 seconds and an event occurs at CH2 in the beginning as following figure, the system will display CH2 in the full screen for 5 second.

  • Page 55: Spot-Out Monitoring

    Spot-out Monitoring Spot-out Monitoring has nothing to do with Live Screen Output, it monitors the full screen of a certain channel. If you select the Monitoring in the MENU, the one channel among CH1 ~ CH4 is output with a Spot-out or channels are output one by one at an interval as Auto Sequence Mode in the Live Mode.

  • Page 57: Chapter 5 Menu Setup

    Chapter 5 Menu Setup...
  • Page 58 SHR-2040/2041/2042 USER’S MANUAL Before Use ● User validation for entering the MENU window Press the “MENU” key to enter the Menu Setup window. Select Menu out of Menu, Backup, and Shutdown in the Setup field. (You can also perform the Backup and Shutdown functions after this user validation checkup.) The ID is fixed to Admin because only the user with Admin privilege can enter the Menu window.

  • Page 59: System

    System ● System Menu has the following items in detail. Date/Time/Language Setup Date ● Press the “Enter” key and the œ, ƒ¤ Use the Press the “Enter” key to come out of the mode. Time ● Press the “Enter” key and the œ, ƒ...
  • Page 60 Time Synchronization ● The time of your DVR can be synchronized by a specified server. For this purpose, enter the IP address of the time server and determine the initiator of this activity. - Automatic Time Synchronization Synchronizes while gathering time information...
  • Page 61 DST (Daylight Saving Time) ● DST sets the clock one hour ahead the local standard time. This setting enables the system to display the time adjusted for DST. If the DST is set to Off, it does not apply. To set the DST, enter the start time and end time on the right. It allows you to set month, week (e.g.

  • Page 62: Load Factory Default

    SHR-2040/2041/2042 USER’S MANUAL Password Lock ● If it is set to On, a pop-up window for user validation (You have to fill in the Setup, ID, and Password fields.) appears every time you select a menu. If it is set to Off, you can enter menus without entering the password.

  • Page 63: System Log

    System Log ● System Log is used to check the important record by an administrator. ● It displays such contents of a system related log and its execution date/time as System Start, System Termination, and Menu Setup Change. ● First : Moves to the first Log page. ●...
  • Page 64 [USB S/W Upgrade] Download the software to upgrade at http://www.samsung.com, CCTV Part. If the USB memory to upgrade has a format not being supported by DVR set, the upgrade is impossible. In this case, use the “device erase” of menu 5-7 system information and setup.

  • Page 65: Storage Setup

    Then you can see the model name, the capacity, and the status of the HDD in your DVR. The status displays Good, Not good, and Check. In the status of Not good,you should replace the HDD. In the status of Check, you should replace the HDD or check periodically.
  • Page 66 SHR-2040/2041/2042 USER’S MANUAL Note 1 Note 1 [Internal HDD] This is a physical hard disk connected with the IDE cable inside the SHR-2160/2162/2080/2082 main body, and stores data. [External HDD] This is a physical hard disk connected with the port and terminal in the back of the SHR-2160/2162/2080/2082 main body, and stores data.
  • Page 67 Note 2 Note 2 [ATA] Usage : Internal HDD This is a physical hard disk connected with the IDE cable inside the SHR-2160/2162/2080/2082 main body. [USB] Usage : External HDD(Extended HDD or Backup HDD) It is physical hardware that is connected to the front/back part of the SHR-2160/2162/2080/2082 with the USB port.
  • Page 68 SHR-2040/2041/2042 USER’S MANUAL Export/Import the Configuration This menu is used to export or import the DVR-related settings to/from the USB memory. The related settings are as the following: Mode: You can select any of Import and Export. ● File Name or File Open: The file naming is YYMMDD00 by default. “00” is the ●...
  • Page 69 DVR changes to PTZ mode while controlling the DVR with a remote control device. Refer to the remote control device manual on how to control the DVR's PTZ device in the remote control device.

  • Page 70: System Shutdown

    SHR-2040/2041/2042 USER’S MANUAL System Shutdown ● Terminates the work in action safely and turns the power off. Press “OK” in the confirmation window and plug out when you see “Safe to Power Off”. Caution Caution [System Shutdown] Power-off without terminating the system in the System Shutdown menu may incur improper motion like data loss and disk failure.

  • Page 71: Camera

    Camera ● The detailed Camera Menu items are as follows. Camera Config. ● Video On : Camera images from a selected channel appear. Off : Camera images from a selected channel disappear. Covert1 : Displays the information except for the Video information of selected channel. Covert2 : Does not display the any information.
  • Page 72 SHR-2040/2041/2042 USER’S MANUAL ● Title You can name the camera of selected channel. If you press the [Enter] key, the Virtual keyboard will come out. ‹¤Virtual Keyboard If you move the cursor, you can type text by text. Up to 15 texts can be typed. Keyboard cannot be composed of all spaces.

  • Page 73: Ptz Device

    ● It is supported by the PTZ device. The following protocols are now being supported. Samsung / Vic. / Pan. / AD / Phi. / Ern. / Pel-D / Pel-P / Vcl. / Dia. / Kal. /Tech. Baurate ● Baurate is supported by the PTZ device. 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 Parity ●...

  • Page 74: Screen Setup

    SHR-2040/2041/2042 USER’S MANUAL Screen Setup ● It is a window to set Brightness/Contrast/Color for the camera image of each channel. Put the cursor on the channel that you want to adjust and set Brightness/Contrast/Color. Once selected, the channel appears in the right PIP area. Use the œ or ƒ button to adjust the value from 0 to 100.

  • Page 75: Monitoring

    Monitoring Event Monitoring ● It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous. ① Off : Event Monitoring does not operate to turn to the screen where an event occurs. ➁...
  • Page 76 1 CH Support ● 1 CH DVR is supported. If 1 CH Support is On, 1 CH is supported. If 1 CH Support is Off, 4 CH is supported. If 1 CH Support is On, a set reboots and support 1 CH.

  • Page 77: Recording Mode

    15.00 ips(NTSC) / 12.50 ips(PAL). CIF supports from 30.00 ips(NTSC) / 25.00 ips(PAL) regardless of the number of activated camera. Video size ● The Video size is displayed at the bottom of left. When changing to a 1-channel DVR, it only supports 30.00 ips in the Full D1 ● resolution. 5-20 English...
  • Page 78 SHR-2040/2041/2042 USER’S MANUAL Record Video size Mode Video size ● It sets the video to be recorded. Half D1 : (NTSC) 720x240(N) ➝ Normal Auto Deletion ● If you click the [off] button, you can select from on/off. Select “On” to move to the Date selection button and to limit the search date. If you select “Off”, you cannot move to the Date selection button and to limit the search date.

  • Page 79: Event Record Mode

    Event Record Mode ● The detailed items of Event Record Menu are as follows. Event Record Mode setup Event Record Mode setup ● Sets a mode to be recorded when an event occurs. V. Size (Video Size ) ● Sets the size of a screen to be recorded. Half D1 : (NTSC) 720x240(N) ➝...
  • Page 80 5sec / 10sec / 20sec / 30sec / 1min / 3min / 5min / 10min / 20min : Sets the recording time after an event occurs. Video size ● The Video size is displayed at the bottom of left 5-19. When changing to a 1-channel DVR, it only supports 30 ips in the Full D1 resolution. ● 5-23 English...
  • Page 81 Alarm Detection Setup Off : Sensor does not operate. ● ① N.O(Normal Open) Sensor : Sensor remains open all the time and if closed, ➁ N.C(Normal Close) Sensor : Sensor remains closed all the time and if open, ● It is used to set a camera that synchronizes with the current sensor. The default setting follows the sensor number.

  • Page 82: Motion Detection Setup

    SHR-2040/2041/2042 USER’S MANUAL Motion Detection Setup Motion Detection Mode ● Off : Motion Detection does not operate On : Motion Detection operates. Area ● Selects the Motion Detection area. It is composed of 45x40(NTSC)/45x48(PAL) sized Block. It is impossible to set 4 block rows(Up/Down/Left/Right) to allow them to be displayed in all monitors.
  • Page 83 Sensitivity ● Sets the sensitivity of motion detection. Sensitivity: 1(L), 2, 3, 4, 5, 6, 7, 8, 9, 10(H). Alarm-Out ● Sets the Alarm-Out when Motion occurs. 5 Alarm Outs are supported. Select an alarm-out that you want to synchronize with the current motion channel. Multi-selection is possible.

  • Page 84: Schedule

    SHR-2040/2041/2042 USER’S MANUAL Schedule This setup selects a time to record automatically. Selection by the day or by the time is available. The default value is set to “Event Record”. Press “CH >” copies the value of Channel 1 to all the channels. ●...
  • Page 85 Alarm Out Schedule You can schedule the automatic output for alarms. Alarm Out Schedule Alarm 1 Event Driven The scheduling is enabled by selecting alarms, days and time blocks. The default setting is Event Driven. For each alarm or beep, you can activate or deactivate alarming. In case of Event Driven, the alarm can be sent only when an event is issued.

  • Page 86: Backup

    To format FAT32, Format the device as FAT32 in the PC or erase the device in the Storage Setup menu, which enable to backup files. - In case of back-up devices, please check the compatibility list of the storage devices. The list of the compatible devices with Samsung DVR can be obtained from your vendor.

  • Page 87: Network

    Network IP Setup Connection Mode ● Designates the kind of the network connected to the main body of SHR-2040/2041/2042. Static IP Dynamic IP ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE. Bandwidth ● Designates the network speed to which the main body of SHR-2040/2041/2042 is connected.
  • Page 88 SHR-2040/2041/2042 USER’S MANUAL ● Sets the IP address for the main body of SHR-2040/2041/2042 to connect with the network. If the Connection Mode is set to Static IP, you shall type in IP yourself. If the connection mode is Dynamic IP or ADSL(PPPoE), the IP allocated by the DHCP server or ADSL company will be automatically displayed.
  • Page 89 - If you select Off, the IP will not be registered in DDNS. - If you select Samsung DDNS, the IP will be registered in the DDNS operated by Samsung. Select MAC Address as the Address Type in the Setup ➝ Site Setup ➝...
  • Page 90 SHR-2040/2041/2042 USER’S MANUAL Callback Settings The Callback function is used to forward a callback message to the IP where SmartViewer ● is in action in case Alarm, Motion Detection, or Video Loss event occurs. On/Off : Off is default but you may choose On. ●...

  • Page 91: Network Setup

    Network Setup Port Setup for SmartViewer Connection The Port value for DVR registration of SmartViewer (Setup ➝ Site Setup) shall be as ● same as that of the set (TCP). If you want to use the IP Router, you shall forward the activated Port depending on the ●...

  • Page 93: Chapter 6 Ptz Camera Control

    Chapter 6 PTZ Camera Control...

  • Page 94: Ptz Camera Control Mode

    PTZ button in front of SHR-2040/2041/2042 will turn blue. PTZ Camera Control Mode supports Pan, Tilt, and Zoom operation. English PTZ Device Protocol Baudrate Parity Data Samsung 38400 None 38400 None Pan. 19200 None...
  • Page 95 When using the remote controller (SCC2000), direct camera control is available only for Samsung Protocol in the remote controller (refer to the SCC2000 user manual). If there is no PTZ control within the maximum 5 minutes in DVR, the PTZ mode is cancelled automatically.

  • Page 96: Basic Operation Of Pan, Tilt, & Zoom

    SHR-2040/2041/2042 USER’S MANUAL Basic Operation of PAN, TILT, & ZOOM ● Press the LEFT or RIGHT button in front SHR-2040/2041/2042 in PTZ Camera Control Mode to control PTZ Camera horizontally. TILT ● Press the UP or DOWN button in front SHR-2040/2041/2042 in PTZ Camera Control Mode to control PTZ Camera vertically.

  • Page 97: Preset Setup

    When using a remote control device (SCC2000), it is possible to control the camera with the remote control limited to the Samsung protocol. (refer to SCC2000 user manual) If there is no PTZ control for 5 minutes from the DVR, PTZ mode is automatically cancelled.
  • Page 98 SHR-2040/2041/2042 USER’S MANUAL ● Move the cursor to right and press ENTER in PTZ Control Mode first. Then, press the “Enter” to run P/T/Z/ operation mode in the PIP screen and press the “Enter” again to cancel P/T/Z/ Motion Mode. ●...

  • Page 99: Camera Menu Setup

    Camera Menu is a menu supplied by PTZ Camera itself. This Menu sets up several conditions of PTZ Camera. Note Note Pan. or Samsung Protocol Camera only is authorized for Camera Menu setup. ● Press the Preset button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to select Camera Menu.

  • Page 100: Preset View

    PTZ Camera Control Mode to select Preset. ● Control the cursor until it reaches a preset position number that you want to move and you can check it in the right PIP Screen. English TELE WIDE VIEW PRESET (For example, Samsung Protocol)

  • Page 101: Other View

    Control Mode to supply PTZ Camera. This is a very special function. Note Note Samsung, Pan., Pel-P, or Pel-D Protocol PTZ Camera supports this function. Samsung : Auto Pan / Scan / Pattern Pan. : Auto Pan / Sequence / Sort...

  • Page 103: Chapter 7 Recording

    Chapter 7 Recording...

  • Page 104: Rec (Normal Recording)

    SHR-2040/2041/2042 USER’S MANUAL REC (Normal Recording) ● Pressing REC the button starts recording as set in the record mode. Then, REC LED lights on and a recording icon appears on the screen. During the recording in HDD, the front HDD LED blinks. ●...

  • Page 105: Schedule Recording

    Schedule Recording ● While “Record Schedule” or “Schedule/Event recording” is selected in the Record Schedule menu, Schedule Recording automatically starts. Otherwise, Schedule Recording remains inactivated. During the Schedule Recording, Recording Icon appears on the screen. During the recording in HDD, the front HDD LED blinks. ●...

  • Page 106: Event Recording

    SHR-2040/2041/2042 USER’S MANUAL Event Recording Alarm Detection ● Sensor operation mode in Alarm of Event Record menu shall be set to N.O (Normal Open) or N.C (Normal Close). Motion Detection ● Motion detection in the Event Recording menu shall be set to On. Video Loss Detection ●...

  • Page 107: Chapter 8 Search And Play

    Chapter 8 Search and Play...
  • Page 108 SHR-2040/2041/2042 USER’S MANUAL Before Use ● Pressing the “SEARCH” button shows Search Menu on the screen as seen above. ● Calendar Search searches a video file by the use of a calendar at the desired time. ● Event Search searches a video file recorded by the occurrence of event. ●...

  • Page 109: Calendar Search

    Calendar Search ● Be sure to select both the channel and the date to search. And press the [OK] button to search for the desired time. ● Use a calendar to search the video file of desired time. Four channels in maximum are in the range of search.

  • Page 110: Event Search

    SHR-2040/2041/2042 USER’S MANUAL Event Search ● Searches Normal Recording, Schedule Recording, Alarm Recording, Motion Recording, and V.Loss(Video Loss) Recording by the time. ● You shall select a channel to search to see the event information of the channel. ● On the basis of event information for each channel, the system searches a video file for the event.

  • Page 111: Date/Time Search

    Date/Time Search ● Use the Date/Time information to search a video file at the time as you desire. Up to 4 channels can be searched at once. After you select a channel with the œ, ƒ, [Enter] button, the checkbox on the right of ●...

  • Page 112: Go To First Search

    SHR-2040/2041/2042 USER’S MANUAL Go to First Search ● Searches the oldest one among recorded video files. Up to 4 channels can be searched at once. After you select a channel with the œ, ƒ, [Enter] button, the checkbox on the right of the ●...

  • Page 113: Go To Last Search

    Go to Last Search ● Searches the latest one among recorded video files. Up to 4 channels can be searched at once. After you select a channel with the œ, ƒ,[Enter] button, the checkbox on the right of the ● selected channel number will be checked.

  • Page 114: Backup

    SHR-2040/2041/2042 USER’S MANUAL Backup ● First, select the backup device. ● Mark the data of device. ● Select the file name to backup, and the detail information of a file is displayed in the below. ● The [Previous] button shows the previous page. ●...

  • Page 115: Playback

    Playback ● Press the PLAY/PAUSE button( ● If you used the SEARCH button for playback just before, the system would remember the information of the played channel until you click the PLAY/PAUSE button( then the system plays the previous channel. If you press the PLAY/PAUSE button( never tried the playback.
  • Page 116 SHR-2040/2041/2042 USER’S MANUAL ● Definition Play Screen Mode 4 Split Screen ① 4 Split Screen : If you select more than a channel, 4 Split Screen will appear. ➁ Single Screen : This appears when you select one channel in Search. If you press the ➂...
  • Page 117 Play at Faster Speed ● If you press the LEFT or RIGHT button( able to see the screen at the x2, x4, x8, x16, x32, and x64 speed either forwardly or reversely. ● Viewing Still Screen If you press the LEFT or RIGHT button( be able to see still screens forwardly or reversely.

  • Page 119: Chapter 9 Smart Viewer

    Chapter 9 Smart Viewer...

  • Page 120: Introduction

    SHR-2040/2041/2042 USER’S MANUAL Introduction Smart Viewer is a program that a general PC user is able to install SHR-2040/2041/2042 to his PC to monitor the video and audio data in the real time through network without going to the site where SHR-2040/2041/2042 is installed. English...

  • Page 121: Feature

    Connection is open to you at any time to monitor video and audio data by inputting IP Address only. ● You can not only perform real-time recording( * .dvr format) with User’s PC whereas necessary during the monitoring but also convert recorded video files( * .dvr format) into frame unit images(JPEG format).

  • Page 122: Pc Specification(Recommendation)

    SHR-2040/2041/2042 USER’S MANUAL PC Specification(Recommendation) ● OS : Win2000, WinXP ● Recommendation : Note Note Depending on Recording Rate, Video Size, and user’s PC specification set to SHR-2040/2041/2042, the number of Smart Viewer playback frame varies. For the detailed specification, refer to Appendix 4. English CPU Pentium 3, 1GHz or higher RAM 256 MB or higher...

  • Page 123: Smart Viewer Installation

    Smart Viewer Installation Smart Viewer Installation ● Put a Smart Viewer Program CD in CD-ROM and open the “Smart Viewer” folder in the CD. ● Run the “Setup.exe” file. English...
  • Page 124 SHR-2040/2041/2042 USER’S MANUAL ● Click the “Next” button. ● If you agree with Smart Viewer License, click “Yes”. ● Designate a folder to install Smart Viewer in it and click “Next”. English...
  • Page 125 ● The system proceeds with setup file installation and system setup. ● Installation is complete. Click the “Finish” to terminate the installation. English...

  • Page 126: Smart Viewer Program Execution

    SHR-2040/2041/2042 USER’S MANUAL Smart Viewer Program Execution ● Double-click the Smart Viewer icon in the background screen to run the program. English...

  • Page 127: Smart Viewer Initial Screen

    @ This button terminates or minimizes the program. # It displays the current date, day, and time. $ This button is used for the connection with the preset DVR(SHR-2040/2041/2042) or site. % This screen shows the monitoring video.

  • Page 128: Monitoring Mode

    2. Duplicate Admin User Connection - When the DVR that you want to connect to has been already occupied by an Admin user but you retry connection with the Admin privilege, the previously connected session is automatically disconnected.
  • Page 129 Note Note No more than 3 users, one Admin. authorized user and 2 User authorized users are allowed to access SHR-2040/2041/2042 simultaneously.(In the case of multicast, 5 User authorized users are allowable.) Caution Caution Once occupied by 3 users( In the case of multicast, 6 users), SHR-2040/2041/2042 does not permit more connection.
  • Page 130 SHR-2040/2041/2042 USER’S MANUAL ● Time Information - As soon as you are connected to SHR-2040/2041/2042, the current date, day, and time of SHR-2040/2041/2042 will be displayed. - Otherwise, the current date, day, and time of your PC will be displayed. ●...
  • Page 131 Note Note # Clicking the speaker icon turns the audio of channel on or off. : Audio OFF If you turn the audio of a SHR-2040/2041/2042 channel off, “Disable” will be displayed. : Audio Disabled ✴ For the Audio on channel now, use the following audio button to adjust the volume and set the mute.
  • Page 132 ‹ Connection Failed : Failed in connecting to SHR-2040/2041/2042. ‹ Disconnected.. : Finished connecting to SHR-2040/2041/2042. ‹ Setup(Remote) : SHR-2040/2041/2042 setup at Dvr Setup of Viewer changed. ‹ Setup Start / End (Local) : Start/Finish the Menu screen at SHR-2040/2041/2042.
  • Page 133 When Time Change, Load Factory Default, Network Change, System Shutdown, or Hdd Format event occurs, Smart Viewer terminates the connection automatically. ● Camera connection Indication Window - Displays the connection condition of DVR and CAMERA in the list. Note Note [DVR Icon Color] ‹...
  • Page 134 SHR-2040/2041/2042 USER’S MANUAL ● Screen Split Selection Button - Full Screen / Single / Quad / Nine-Split / Sixteen-Split Mode - You can change the Split Mode of the screen under monitoring. ● Sequence Mode Button - Changes the channel to be played at the preset interval. - The sequence time interval can be set at the Setup Mode ➝...
  • Page 135 Note Note The number in the screen icon indicates the screen position in SmartViewer. : The orange icon indicates the current channel is connected to a camera. : The gray icon indicates the current channel is connected to a camera but not displayed in the screen.
  • Page 136 - If you press CALLBACK, the CALLBACK window will be activated to receive messages. - Receiving a message, Smart Viewer automatically tries to contact a DVR. - In the event of Video Loss, Alarm, or Motion Detection, a message is received.
  • Page 137 - The FAVORITE information setting value is saved in the Config file even after you are away from the SITE. - If you change the DVR list composing the SITE from Setup, the FAVORITE setting value will be initialized 9-18...
  • Page 138 - If you select a channel in the playback and click the “Save” button, the video will be saved in a file format with the extension of * .dvr in a designated folder of your - The name of the directory in which an image will be saved, the file name, and the image save length shall be set up at the Setup Mode ➝...
  • Page 139 Note Note The PAN / TILT / ZOOM function is supported to all the cameras. But, POWER ZOOM is supported only by Samsung Smart Dome Camera, and assured to the operation of TILT below 45°. 9-20 English...
  • Page 140 $ may vary depending on the camera vendor. And those functions may not be sup- ported by some product. - Samsung cameras support those functions. - In case of Panasonic cameras, the names of AUTOPAN, SCAN, and PATTERN are as following: @ SEQUENCE # AUTOPAN $ SORT.
  • Page 141 # This is a button for the role of Enter. Note Note The Camera Menu Setup function is supported by Samsung and Panasonic camera only. Caution Caution As far as SHR-2040/2041/2042 uses the PTZ camera control functions, Smart Viewer can not control PTZ Camera.

  • Page 142: Search Mode

    # To change to the remote mode for the transmission of video recorded in SHR-2040/2041/2042 through network. $ To change to the local mode for the playback of .dvr files recorded in your PC. % Calendar window to select “Year/Month/Day” for search.
  • Page 143 ● DVR(SHR-2040/2041/2042) Selection/Change by contacting SITE - Same as “DVR(SHR-2040/2041/2042)/SITE Connection” of the monitoring mode. ● DVR(SHR-2040/2041/2042) Selection/Change by contacting SITE - Select SHR-2040/2041/2042 from the Contact list. - SHR-2040/2041/2042 turns black if contacted with the ADMIN authority and turns gray if contacted with the USER authority.
  • Page 144 - If you select a channel in the playback and click the SAVE button, the video is saved in a file format with the extension of .dvr in a designated folder of your PC. - The directory in which an image will be saved, the file name, and the video length to be saved can be set at the Setup Mode ➝...
  • Page 145 @ File Converting Button - This function converts * .dvr files into “ * .jpg” files. - Click the “Open” button to select a * .dvr file to be converted. - Select the JPEG Frame or AVI Video. - If the JPEG Frame is selected, the file is converted into the “ * .jpg” file by clicking the “Start”...
  • Page 146 SHR-2040/2041/2042 USER’S MANUAL # Print - This function outputs the screen zone of the playback video which is now being displayed. $ Setup Mode Button - This button pops up the setup mode window. ● Play Buttons ! Play : Play @ Reverse Play : Reverse Play # Stop : Stop $ Fast Forward : Faster Play...
  • Page 147 Note Note During the play(Play/RevPlay/FF/FB), disconnection or change to the both monitoring mode and local mode is not permitted. Click the Stop button first before the change. ● Time Line - Displays the time information of video in SHR-2040/2041/2042 selected on the calendar window.
  • Page 148 Note Note Only the * .dvr file saved by the audio activation can be played in the local mode. 9-29 English : Selects a file to be played in the file selection window and changes...

  • Page 149: Setup Mode

    Setup Mode ● Initial Screen ! Button to select items for DVR Setup, Viewer Setup, Site Setup, and S/W Version setup. @ It shows what the selected Setup item can set up in detail. # button to terminate the setup window.
  • Page 150 Setup Item Selection Button - It is used for the selection of each setup item. - It is composed of 4 items-DVR Setup, Viewer Setup, Site Setup, and S/W Version. - DVR Setup : Allows you to change the remote menu setup items of SHR-2040/2041/2042.

  • Page 151: Dvr Setup

    Recording, and Network. Note Note - You are authorized with access to DVR Setup in an Admin authority only. - The button will not be activated if you are connected to SHR-2040/2041/2042 as a user or unconnected. ! Among more than one SHR-2040/2041/2042 that is connected now, the name of SHR-2040/2041/2042 connected in the Admin authority will be listed.
  • Page 152 For the detailed items of DVR Setup, refer to Chapter 5. - Admin Password You can change the Admin password related settings for control of DVR. - User Password You can change the user password related settings for control of DVR.
  • Page 153 Caution Caution System Password shall be composed of numeric only, up to 8 digits. Note Note - The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are not supported at the System Password input. - Use the BACKSPACE key to delete the contents. Note Note Default System Password is set to 4321.
  • Page 154 SHR-2040/2041/2042. In short, the language setup of Smart Viewer does not change. Language specification to be supported is subject to change later. - Storage Setup It displays the information of the HDD that is contained in your DVR. 9-35 English...
  • Page 155 - Remocon (Remote Control Device) Remocon can set the remote control device installed to SHR-2040/2041/2042. Note Note If you install the remote control device to the main body of SHR-2040/2041/2042 and activate the setup, PTZ control is not available in the Viewer. 9-36 English...
  • Page 156 SHR-2040/2041/2042 USER’S MANUAL @ Camera - Config. Config. sets Video, Audio On/Off, Camera Title, and Auto Sequence Time for each channel of on-line SHR-2040/2041/2042. Caution Caution - Only English is supported for the title. If you type in and apply the title in your native language, warning message pop sup to ask your retyping.
  • Page 157 - PTZ device It sets Camera ID, Protocol, Baud Rate, Parity, Data Bit, Stop Bit, and Serial Mode when connecting the dome camera to all the channels. # Monitoring - Monitoring It sets both the event monitoring and OSG display of the live mode. 9-38 English...
  • Page 158 SHR-2040/2041/2042 USER’S MANUAL $ Recording - Rec. Mode It sets the Video Size, Quality, and Rate values during the recording by the setting the recoding ON/OFF for the related channel in the live mode. NTSC Note Note Full D1(L) Video Size does not support 15.00ips, 10.00ips (NTSC) / 12.50ips, and 8.33ips(PAL) Rate.
  • Page 159 - Event Rec. It sets the Video Size, Quality, Rate, Pre Alarm, and Post Alarm values to be recorded when an event occurs. NTSC Note Note Full D1(L) Video Size does not support 15.00ips, 10.00ips(NTSC) / 12.50ips, and 8.33ips(PAL) Rate. 9-40 English...
  • Page 160 SHR-2040/2041/2042 USER’S MANUAL - Alarm Rec. It sets the information necessary for the alarm recording. Note Note More than one camera should be selected to apply the alarm. - Motion Rec. It sets the information necessary for the recording by the motion Detection. 9-41 English...
  • Page 161 - Video Loss Video Loss sets up the information on how to inform the user of Video Loss of SHR-2040/2041/2042. % Schedule You can configure schedule-related settings. - Record Schedule You can change the schedule recordingrelated settings. 9-42 English...
  • Page 162 SHR-2040/2041/2042 USER’S MANUAL - Alarm Out Schedule You can change the alarming schedulerelated settings. 9-43 English...
  • Page 163 ^ Network - Password It sets the password for Admin and User when connecting with SHR-2040/2041/2042 through the network in Smart Viewer. ● Double-click the Smart Viewer icon in the background screen to run the program. Caution Caution - Network password should be composed of numeric and it can be input up to 8 digits. - If you leave password blank and apply it, a warning message pops up to ask your retyping.
  • Page 164 SHR-2040/2041/2042 USER’S MANUAL - IP Settings It sets the network connection method of SHR-2040/2041/2042. SHR-2040/2041/2042 supports the connection with Static IP, Dynamic IP, and ADSL(PPPoE). It can set the network bandwidth. Adjust the bandwidth to the network condition in which SHR-2040/2041/2042 is connected.
  • Page 165 ● Transfer Protocol - You can change the transfer protocol setting value. The protocol supports TCP/IP and UDP(Unicast, Multicast). Control Port(TCP/IP) and Port(UDP) to alter the connection port. Both Multicast IP and TTL are used for UDP(Multicast). ● Callback - You can set the Callback function of SHR-2040/2041/2042. - In the event of Alarm, Motion Detection, or Video Loss, set the IP address and port of PC where SmartViewer is installed to forward Callback messages.

  • Page 166: Viewer Setup

    * .dvr file when connecting with SHR-2040/2041/2042. @ Item to set the information necessary for converting the file saved in your PC with * .dvr file into JPEG. # Item to set the information necessary for the auto sequence mode.
  • Page 167 ! Location 2040/2041/2042 - You can convert the file saved in your PC with .dvr format into JPEG file. The frames composing .dvr file will be converted into JPEG file. Sets the directory in which the converted JPEG file will be saved.
  • Page 168 - If you check “Auto Connection Enable”, the names of SHR-2040/2041/2042 and Site currently registered at the DVR/Site list will be displayed in the following list. If you select one from the list, the smart viewer will connect to the selected SHR-2040/2041/2042 or Site when it operates later.

  • Page 169: Site Setup

    Site Setup - Click the [Site Setup] button for Site Setup. - The information of DVR(SHR-2040/2041/2042) or Site that you want to connect by Smart Viewer is set in the Site Setup. - Smart Viewer allows you to connect with DVR(SHR-2040/2041/2042) or Site registered only here.
  • Page 170 - The information of DVR(SHR-2040/2041/2042) that you want to connect by Smart Viewer is set in the DVR List. - You can register a new DVR(SHR-2040/2041/2042) or delete and edit the DVR(SHR-2040/2041/2042) selected from the registered list, and the name and IP / MAC Address of the registered DVR(SHR-2040/2041/2042) is displayed in DVR List.
  • Page 171 - Select “Port” so that it matches the port number that you’ve set in the network menu of DVR (SHR-2040/2041/2042). - If your DVR (SHR-2040/2041/2042) uses a dynamic IP such as in a cable modem or VDSL, or PPPoE for ADSL, select “MAC Address” for Address Type and type in the MAC address of the DVR (SHR-2040/2041/2042).
  • Page 172 - If you want to make connection via the an URL, select “URL” for Address Type and type in the URL set for the DVR or IP splitter in the URL menu item. - Select “Port” so that it matches the port number that you’ve set in the network menu of DVR (SHR-2040/2041/2042).
  • Page 173 Note Note - The MAC address of DVR is written at the side label of the product. It is also found in the system information of DVR Menu. - If the DVR(SHR-2040/2041/2042) is connected to ADSL, the network bandwidth is low.
  • Page 174 SHR-2040/2041/2042 USER’S MANUAL # To Edit the old DVR(SHR-2040/2041/2042) - If you select a DVR(SHR-2040/2041/2042) in the DVR list to edit and press the [Edit] button, the following message box pops up. Press [OK] button to edit the DVR(SHR-2040/2041/2042). - When the DVR(SHR-2040/2041/2042) to edit is connected with the Smart Viewer, the following message box pops up and the DVR(SHR-2040/2041/2042) cannot be edited.
  • Page 175 ● Site List - You can register and control the many DVRS(SHR-2040/2041/2042) to be connected with the smart viewer at once with a site in the site list. You are allowed to register a new site, and delete or edit the selected site in the registered list.
  • Page 176 - When deleting the DVR(SHR-2040/2041/2042), it is deleted from the site composition but the DVR(SHR-2040/2041/2042) information is not deleted. - When the site to delete or the site that is composed of the DVR (SHR-2040/2041/2042) to delete is connected with the Smart Viewer, the following message box pops up and the site or the DVR (SHR-2040/2041/2042) cannot be deleted.
  • Page 177 “Site [0]” as a default is created and the DVR(SHR-2040/2041/2042) add to it. - When the site to add a DVR (SHR-2040/2041/2042) is connected with the Smart Viewer, the following message box pops up and the addition of DVR(SHR-2040/2041/2042) to the site is impossible. Be sure to cut the connection between the DVR(SHR-2040/2041/2042) and the Smart Viewer before you add a DVR(SHR-2040/2041/2042).
  • Page 178 DVR(SHR-2040/2041/2042) System S/W, being connected to the smart viewer, are displayed. - You can upgrade the on-line DVR(SHR-2040/2041/2042) System S/W remotely. You are authorized with S/W upgrade in an Admin authority only. With the authority of user or without connecting with the DVR(SHR-2040/2041/2042), your access will be denied.
  • Page 179 - When the smart viewer does not connected with the DVR(SHR-2040/2041/2042), it displayed with a gray and “Not connected” is displayed in the status. - Each DVR Version has a check box, which is used for S/W Upgrade. ● DVR(SHR-2040/2041/2042) S/W Upgrade - Smart Viewer upgrades on-line DVR(SHR-2040/2041/2042) S/W remotely.
  • Page 180 $ The progress of file transmission and upgrade is displayed at the bottom. Caution Caution Be sure to suspend all the DVR system functions in action such as recording, MENU, backup, and playback before you upgrade the DVR(SHR-2040/2041/2042) S/W. Never try to turn the DVR(SHR-2040/2041/2042) power off during the S/W upgrade.
  • Page 181 ! Select the DVR you want to restore the setting values. @ Click the button as shown below to open a menu setup file (*.dat). # Press the [Import] button to transfer the setup file to the selected DVR. Then the menu settings are recovered.

  • Page 183: Appendix

    Appendix...

  • Page 184: Product Specification

    SHR-2040/2041/2042 USER’S MANUAL Product Specification Item Broadcasting Input Voltage Power Consumption Video Audio Live Monitoring 10-1 English Details Embedded OS NTSC/PAL System 2040-DC 12V, AC 110-220(NTSC), AC 100-230(PAL) 2041/2042 - AC 110-220(NTSC) AC 100-230(PAL) 2040 : 30Watt, 2041 : 60Watt, 2042 : 51Watt Composite 4 Channel - 1.0Vp-p - 75 Ω...
  • Page 185 Item Compression Video : MPEG4 Method Audio : ADPCM Resolution CIF(C) 352X240(NTSC) /352X288(PAL) Video Size & Performance Half D1(N) 720X288(NTSC) /720X288(PAL) Recording Full D1(L) 720X480(NTSC) /720X576(PAL) Normal ➝ REC Key Schedule ➝ Schedule Table Event Recording -Alarm Detection Mode -Motion Detection -Video Loss -Pre &...
  • Page 186 SHR-2040/2041/2042 USER’S MANUAL Play Back Network Serial I/F Remote Viewer Operation Temp. Preservation Temp. Operation Humidity Preservation Humidity Size Weight 10-3 English Item Calendar Event - Normal, Schedule, Alarm, Motion, Video Loss Search Mode Date/Time Go to First Go to Last Backup Data Video size 1Ch Mode...

  • Page 187: Outline Drawings

    Outline Drawings [SHR-2040] [SHR-2041] 10-4 English...
  • Page 188 SHR-2040/2041/2042 USER’S MANUAL [SHR-2042] 10-5 English...

  • Page 189: Factory Default

    Factory Default This restores the Network information and preset values in SHR-2040/2041/2042 to the original state at the time of factory shipment. Factory Default will be done as follows; - Use System / Load Factory Default in MENU or, - If you hold on to the Mode button in Live Mode and keep pressing the CH2 button for 5 seconds, the system will return to the Factory default condition.
  • Page 190 Detailed Items Duration Event Monitoring Date OSD Display Time Title Status Spot Out Channel Spot Out Event Monitor Monitor Out 1CH DVR Support Mode Video Size Quality Rate Continuous Recording Event Recording Video Size Video Size Event Record Mode Rate...
  • Page 191 Classification Detailed Items IP Settings Network Transfer Protocol Settings Callback Settings Factory Setup Connection Mode Static IP Bandwidth 2Mbps Admin Password 4321 User Password 4321 192.168.001.200 Gateway 192.168.001.001 Subnet Mask 255.255.255.000 168.126.063.001 ADSL User ID Password Protocol type Port(TCP) 0554.0555.0556.0557 Port(UDP) 8000-8159 Unicast / Multicast...

  • Page 192: Shr-2040/2041/2042 Smart Viewer Frame Specification For The Playback

    SHR-2040/2041/2042 USER’S MANUAL SHR-2040/2041/2042 Smart Viewer Frame Specification for the Playback NTSC FRAME RATE 10-9 English Viewer Screen Split Mode Half D1(N) Nine-split 1 frame/sec Fore-split 15 frame/sec Single 15 frame/sec Half D1(N) Nine-split 10 frame/sec Fore-split 10 frame/sec Single 10 frame/sec Half D1(N) Nine-split...
  • Page 193 FRAME Viewer Screen RATE Split Mode Nine-split 12.5 Fore-split Single Nine-split 8.33 Fore-split Single Nine-split 6.25 Fore-split Single Nine-split Fore-split Single Nine-split Fore-split Single Nine-split Fore-split Single Note Note The play frame specification of Smart Viewer varies on the setup of SHR-2040/2041/2042 Recording Rate and Video Size or the screen split mode of Smart Viewer.

  • Page 194: Troubleshooting(Faq)

    SHR-2040/2041/2042 DVR. 6. You cannot enter MENU by forgotten password. - If you forget the password, you shall reset SHR-2040/2041/2042 DVR to the values set at the factory. Keep pressing both the “MODE” button and the “2” button on the left for 5 seconds The password default is “4321”.
  • Page 195 Please consult with an expert who works for the shop where you bought the product. 13. You cannot connect to SHR-2040/2041/2042 DVR through Smart View. - Check if 3 Smart Viewer users are in connection with SHR-2040/2041/2042 DVR. SHR-2040/2041/2042 DVR allows no more than 3 users’ connection with Smart Viewer at a time.
  • Page 196 19. DVR device does not show what has been upgraded after adding a hard disk. - Make sure that the additional external HDD installed is one of the devices listed on the compatibility list of HDDs.

  • Page 197: Open Source License Report On The Product

    Open source license report on the product This product uses software provided under the name of GPL and LGPL. You can receive the following GPL and LGPL source codes by email request to www.sec.co.kr. - GPL Software Kernel, Busybox, Sysvinit, dvd+rw-tools, cdrtools, dosfstools - LGPL Software gLibc, Inetutils GNU GENERAL PUBLIC LICENSE...
  • Page 198 SHR-2040/2041/2042 USER’S MANUAL containing the Program or a portion of it, either verbatim or with modifications and/or translated into another lan- guage. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribu- tion and modification are not covered by this License;...
  • Page 199 the terms of Sections 1 and 2 above on a medium customarily used for soft- ware interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corre-...
  • Page 200 SHR-2040/2041/2042 USER’S MANUAL invalid or unenforceable under any par- ticular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;...
  • Page 201 BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSI- BILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs...
  • Page 202 SHR-2040/2041/2042 USER’S MANUAL License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
  • Page 203 we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard.
  • Page 204 SHR-2040/2041/2042 USER’S MANUAL forming a work based on the Library, and copy and distribute such modifica- tions or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library.
  • Page 205 even though third parties are not com- pelled to copy the source along with the object code. 5. A program that contains no deriva- tive of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library".
  • Page 206 SHR-2040/2041/2042 USER’S MANUAL ■ If distribution of the work is made by offering access to copy from a desig- nated place, offer equivalent access to copy the above specified materials from the same place. ■ Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
  • Page 207 directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any par- ticular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply...
  • Page 208 SHR-2040/2041/2042 USER’S MANUAL TIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIM- ITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY...
  • Page 209 "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.
  • Page 210 SHR-2040/2041/2042 USER’S MANUAL * in documentation (online or textual) provided with the package. * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
  • Page 211 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

This manual is also suitable for:

Shr-2042Shr-2040

Table of Contents