Transferring Calls Between Handsets, Conference Calls - Panasonic KX-TG5631S Operating Instructions Manual

Base unit
1
Press {SELECT} repeatedly to display
the desired handset number. i
{CALL}
L The handset beeps for 1 minute.
2
To end the intercom call, press
{CALL}.
Answering an intercom call
Handset
1
Press {C} to answer the page.
2
To end the intercom call, press {OFF}.
Base unit
1
Press {CALL} to answer the page.
2
To end the intercom call, press
{CALL}.
Note:
L When the ringer volume is set to off, the
handset or the base unit rings at the low
level for intercom calls.
For assistance, please visit http://www.panasonic.com/phonehelp
Multi-unit Operation
Transferring calls
between handsets,
conference calls
Available model:
KX-TG5632/KX-TG5633/KX-TG5634/
KX-TG5652/KX-TG5653
Outside calls can be transferred between 2
handsets. 2 handsets can have a
conference call with an outside party.
1
During an outside call, press
{INTERCOM} to put the call on hold.
2
To page another handset, enter its
extension number ({1}
L {4} can be used if you have 4
handsets.
3
Wait for the paged party to answer.
L If the paged party does not answer,
press {C} to return to the outside
call.
4
To complete the transfer, press {OFF}.
L The outside call is being routed to
another handset.
To establish a conference call, press
{Conf}.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
L To put the outside call on hold, press
{HOLD}. To resume the conference,
press {Conf}.
–
{4}).
45