Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
WARNING marking concerning Risk of Explosion. IMPOINSTRUCTIONS Important Safety Instructions INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING – When using tools, basic precautions should always be followed, including the following: SKU 95630...
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or SKU 95630 For technical questions, please call 1‑800‑444‑3353. moving parts. Damaged or entangled cords increase the risk of electric shock.
Page 4
Service Tool service must be performed only by qualified repair personnel. When servicing a tool, use only identical replacement parts. Use only authorized parts. SAVE THESE INSTRUCTIONS. SKU 95630...
Page 5
Compressor and any additional tools and equipment. Industrial applications must follow OSHA guidelines. SKU 95630 For technical questions, please call 1‑800‑444‑3353. Do not stand or sit on the Air Compressor. Serious injury could result if the Compressor is tipped.
Grounded Tools: Tools with Three Prong Plugs 3‑Prong Plug and Outlet Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. SKU 95630...
Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. SKU 95630 For technical questions, please call 1‑800‑444‑3353. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration.
Assembly Diagrams near end of manual. Unpacking When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. SKU 95630...
Route the air hose along a safe route to reach the work area without creating a SKU 95630 For technical questions, please call 1‑800‑444‑3353. tripping hazard or exposing the air hose to possible damage. The air hose must...
Page 10
If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment. AFTER EACH USE, wipe off with a clean, moist cloth. Also completely flush, SKU 95630...
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 95630 For technical questions, please call 1‑800‑444‑3353. Ring and Inlet and Outlet Valves. Please note: This work should only be done by a qualified service technician.
Page 12
Page 12 For technical questions, please call 1‑800‑444‑3353. Part Description Front Cover Water Drain Valve O-Ring Cylinder Block O-Ring Cylinder Head Cap Screw Filter Handle Pressure Switch Pressure Regulator Condenser Power Switch Wire Rubber Pad Locknut Air Outlet Link SKU 95630...
Page 13
Air Brush Housing Needle Adjustment Screw Finger Lever Rocker Needle Adjusting Sleeve Needle Chucking Guide Valve Screw Needle Chucking Nut Needle Cover (Handle) SKU 95630 For technical questions, please call 1‑800‑444‑3353. Part Description Spring Needle O-Ring Valve Rod O-Ring Spring...
Page 14
Limited 1 Year Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase (90 days if used by a professional contractor or if used as rental equipment).