Central Pneumatic 95386 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Air Compressor
  5. 95386
  6. Set up and operating instructions manual

Central Pneumatic 95386 Set Up And Operating Instructions Manual

2 hp, 8 gallon, 115 psi portable air compressor
Hide thumbs Also See for 95386:
Table of Contents

Advertisement

Quick Links

2 HP, 8 Gallon, 115 PSI
Portable aIr comPreSSor
Set uP and oPeratInG InStructIonS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHIS manual.
©
Copyright
2006 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 09k
model
95386
®
. All rights reserved. No portion of this manual or any artwork

Advertisement

Table of Contents
loading

Related Manuals for Central Pneumatic 95386

Summary of Contents for Central Pneumatic 95386

  • Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

  • Page 2: Table Of Contents

    General maIntenance ... 14 maIntenance ScHedule ... 14 cHanGInG tHe oIl ... 15 draInInG moISture From tHe tank ...15 SKU 95386 For technical questions, please call 1-800-444-3353. aIr FIlter maIntenance ... 15 troubleSHootInG ... 16 PartS lISt ... 18 aSSemblY dIaGram ... 19 lImIted 1 Year / 90 daY WarrantY ...

  • Page 3: Important Safety Information

    SKU 95386 For technical questions, please call 1-800-444-3353. not avoided, could result in minor or moderate injury. notIce is used to address practices not related to personal injury.
  • Page 4 Unapproved safety equipment may not provide adequate protection. SKU 95386 For technical questions, please call 1-800-444-3353. Eye protection must be ANSI- approved and breathing protection must be NIOSH-approved for the specific hazards in the work area.

  • Page 5: Air Compressor Safety Warnings

    Operating with low or no oil causes permanent damage and voids warranty. SKU 95386 For technical questions, please call 1-800-444-3353. Do not remove the valve cover or adjust internal components. Compressor head gets hot during operation.

  • Page 6: Grounding

    Maintain labels and nameplates on the compressor. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. This product is not a toy. Keep it out of reach of children. Operate unit on level surface. Check oil level daily and fill to marked level if needed.

  • Page 7: Symbology

    Grounding 120 V~ 3-Prong Plug and outlet (for up to 120 V~ and up to 15 a) SKU 95386 For technical questions, please call 1-800-444-3353. This compressor is intended for use on a circuit that has an outlet that looks like the one illustrated above in 120 V~ 3-Prong Plug and outlet.

  • Page 8: Specifications

    ImPortant SaFetY InFormatIon section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SKU 95386 For technical questions, please call 1-800-444-3353. to PreVent SerIouS InjurY From accIdental oPeratIon: Push the Power button “oFF”...

  • Page 9: Functions

    Locate the Compressor on a flat level surface to ensure proper pump lubrication and to prevent damage to SKU 95386 For technical questions, please call 1-800-444-3353. the unit. Keep at least 12” of space around the unit to allow air circulation.

  • Page 10: Set Up

    The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. SKU 95386 For technical questions, please call 1-800-444-3353. Depending on the tool which you will be using with this compressor, you...
  • Page 11 Turn the Power Switch ON. Let the unit run for 30 minutes. Air will expel freely through the Coupler. Turn the Power Button OFF. Unplug the Power Cord and remove the male coupler. SKU 95386 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: General Operating Instructions

    Do not use the air compressor unless all connections are air tight, the extra air leaking out SKU 95386 For technical questions, please call 1-800-444-3353. will cause the compressor to operate too often, increasing wear on the compressor.

  • Page 13: Emergency Depressurization

    Button. Wait until the Compressor cools down (about 10 minutes); Press the Reset Button (20) to start the compressor; SKU 95386 For technical questions, please call 1-800-444-3353. Pull up on the ON/OFF Power Button. Resume operation. Possible causes of repeated...

  • Page 14: Maintenance And Servicing

    WarnInG! If the supply cord of this compressor is damaged, SKU 95386 For technical questions, please call 1-800-444-3353. it must be replaced only by a qualified service technician. maintenance Schedule...

  • Page 15: Changing The Oil

    Discard the old oil according to local, state and federal regulations. *** Use Air Compressor Oil only (sold separately - SKU 95048). SKU 95386 For technical questions, please call 1-800-444-3353. draining moisture from the tank The Drain Valve (65) is located under the Air Tank (1).

  • Page 16: Troubleshooting

    Unit not on level surface. Crankcase vent clogged. Follow all safety precautions whenever diagnosing or servicing the compressor. disconnect power supply before service. SKU 95386 For technical questions, please call 1-800-444-3353. troubleshooting likely Solutions Check that circuit matches compressor requirements.

  • Page 17: Please Read The Following Carefully

    BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 95386 For technical questions, please call 1-800-444-3353. likely Solutions Check inlet and outlet filters.

  • Page 18: Parts List

    Bearing 6204-AZ Oil Seal B20 40 Crankcase Crank Crankcase Cover Gasket Oil Plug Crankcase Cover Oil Sight Glass Screw SKU 95386 For technical questions, please call 1-800-444-3353. PartS lISt Part description Handle Cylinder Gasket Connecting Rod Piston Oil Clean Ring...

  • Page 19: Assembly Diagram

    Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 95386 For technical questions, please call 1-800-444-3353. Page 19...

  • Page 20: Limited 1 Year / 90 Day Warranty

    (90 days if used by a professional contractor or if used as rental equipment). Harbor Freight Tools also warrants to the original purchaser, for a period of ninety days from date of purchase, that all other parts and components of the product are free from defects in materials and workmanship.

Table of Contents