Table of Contents
Advertisement
Model No.
TX-P42UX30E
Operating Instructions
Plasma Television
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and retain
them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local
Panasonic dealer for assistance.
English
TQB0E2137U
Advertisement
Table of Contents
Related Manuals for Panasonic Viera TX-P42UX30E
Summary of Contents for Panasonic Viera TX-P42UX30E
-
Page 1: Operating Instructions
Model No. TX-P42UX30E Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. - Page 2 This TV may not work correctly with CI module that is not approved by the service provider. • Additional fees may be charged depending on the service provider. • The compatibility with future DVB services is not guaranteed. • Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/tv/...
-
Page 3: Table Of Contents
Contents Do not display a still picture for a long time This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not Be Sure to Read covered by the warranty. Typical still images Safety Precautions····································································4 •... -
Page 4: Safety Precautions
Using an unapproved pedestal or other fixtures may make the TV unstable, risking injury. Be sure to ask your local other open flames away Panasonic dealer to perform setup. • Use approved pedestals (p. 7) / wall-hanging brackets from this product at all (p. 6). -
Page 5: Maintenance
Caution When cleaning the TV, remove the mains Do not block the rear air vents • Blocked ventilation by newspapers, table cloths, curtains, plug • etc. may cause overheating, fire or electrical shock. Cleaning an energized TV may cause electrical shock. Do not expose your ears to excessive When the TV is not going to be used for a volume from the headphones... -
Page 6: Accessories / Options
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children. Optional accessories Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the manual of the optional accessories. Wall-hanging bracket •... - Page 7 Do not use the pedestal if it becomes warped or physically damaged. • If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened.
-
Page 8: Identifying Controls
Identifying Controls Remote Control • Confirms selections and choices • Press after selecting channel positions to quickly change channel • Displays the Channel List [Option Menu] (p. 16) • Easy optional setting for viewing, sound, etc. Teletext (p. 21) • Switches to teletext mode Subtitles (p. 15) •... -
Page 9: Auto Power Standby Function
Changes the input mode SD Card slot (p. 49) Headphones jack (p. 67) Mains power On / Off switch • Use to switch the mains power. If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch. -
Page 10: Basic Connection
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. Example 1 Example 2 Connecting aerial... - Page 11 Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Mains Lead Rear of the TV Make sure that the mains lead is securely fixed. Push until both side tabs click AC 220-240 V To remove from the TV : 50 / 60 Hz...
-
Page 12: Auto Setup
Auto Setup Search and store TV channels automatically. • These steps are not necessary if the setup has been completed by your local dealer. • Please complete connections (p. 10, 11) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. - Page 13 [DVB-C Auto Setup] [DVB-T Auto Setup] DVB-C Auto Setup DVB-T Auto Setup Progress Progress 100% CH 5 This will take about 3 minutes. This will take about 3 minutes. Channel Name Type Quality Channel Name Type Quality CBBC Channel Free TV CBBC Channel Free TV BBC Radio Wales...
-
Page 14: Watching Tv
Watching TV Turn power on • INPUT SD CARD Press for about 1 second • Mains power On / Off switch should be On. (p. 9) MENU ASPECT DIRECT TV REC EXIT Select the mode • The selectable modes vary depending on the stored channels (p. 12). -
Page 15: Other Useful Functions
Other useful functions Display Information banner Display Information banner • Also appears when changing a channel Example : DVB 1 ZDF All DVB-T Channels Radio 20:35 Change category Coronation Street For info press 20:00 - 20:55 Encrypted Dolby D+ Channel position and name Programme Channel type ([Radio], [Data], [HDTV], etc.) Programme Start / Finish time (DVB) -
Page 16: Off Timer
Hold Freeze / unfreeze picture HOLD Display the selectable settings for the current status Check or change the current status instantly • To change OPTION select change [Multi Video] (DVB mode) [Dual Audio] (DVB mode) [Teletext Language] (DVB mode) Allows you to select the image (if Allows you to select stereo / monaural Allows you to select between available) -
Page 17: Last View
Aspect Change the aspect ratio (image size) ASPECT Enjoy viewing the image at its optimum size and aspect. Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 68). ■... -
Page 18: Using Tv Guide
Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). • This function varies depending on the country you select (p. 12). •... - Page 19 ■ ■ To the previous day (DVB mode) To the next day (DVB mode) (red) (green) ■ ■ To view a channel list of the selected type To view a channel list of the selected category (DVB mode) (blue) (yellow) (Category list) select category (Type list) Categor y select type...
-
Page 20: Timer Programming (Dvb Mode)
Timer Programming (DVB mode) Timer Programming is a timer to remind watching or record the programme to the external recorder. Select the forthcoming programme Select the function ([Ext Rec.] or [Reminder]) select select (Timer Programming screen) Timer Programming Wed 27.10.2010 10:46 Function No. -
Page 21: Viewing Teletext
Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FLOF (FASTEXT) mode? In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. - Page 22 FULL / TOP / BOTTOM MENU (green) (TOP) (BOTTOM) Normal (FULL) (Expand the BOTTOM half ) (Expand the TOP half ) View in multi window Watch TV and Teletext in two windows at once MENU Select Picture and text On or Off (Press twice) •...
-
Page 23: Watching External Inputs
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. • To connect the equipment (p. 10, 11, 66, 67) The remote control is capable of operating some functions of selected external equipment. “Operating the equipment with the TV remote control”... -
Page 24: Operating The Equipment With The Tv Remote Control
Operating the equipment with the TV remote control The Panasonic equipment connected to the TV can be directly operated with the below buttons of this TV remote control. Standby Set to Standby mode / Turn on Play Playback videocassette / DVD / video content... -
Page 25: How To Use Viera Tools
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. Display icons of the feature INPUT SD CARD MENU ASPECT DIRECT TV REC Select a feature EXIT select access OPTION RETURN TEXT STTL INDEX HOLD VIERA Link Control Follow the operations of each feature... -
Page 26: How To Use Menu Functions
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu • INPUT MENU SD CARD Displays the functions that can be set (varies according to the input signal) MENU ASPECT DIRECT TV REC... -
Page 27: Menu List
Menu list Menu Item Adjustments / Configurations (alternatives) Basic picture mode [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] In each Viewing Mode and input, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. - Page 28 Menu Item Adjustments / Configurations (alternatives) Changes the image processing of the panel (depending on the input signal) Refresh Rate [50Hz] / [100Hz] • Set to [100Hz] normally Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max] •...
- Page 29 Menu Item Adjustments / Configurations (alternatives) Adjusts the frequency level to suit your favourite sound quality • This function is available when [Mode] is set to [User]. • Select the frequency and change the frequency level by using the cursor button. •...
- Page 30 Menu Item Adjustments / Configurations (alternatives) Adjusts the audio level of PCM output from DIGITAL AUDIO OUT terminal as the initial setting [-12] / [-10] / [-8] / [-6] / [-4] / [-2] / [0] (dB) PCM Optical Level • Normally, PCM sound is larger comparing with the other types of audio track.
- Page 31 Menu Item Adjustments / Configurations (alternatives) Favourites Edit Creates list of favourite DVB-C channels (p. 36) Channel List Skips the unwanted DVB-C channels or edits DVB-C channels (p. 37) Auto Setup Automatically sets the DVB-C channels supplied (p. 34) Manual Tuning Sets the DVB-C channels manually (p. 38) Update Channel List Updates DVB-C Channel List while keeping your settings (p. 38) Favourite Network...
- Page 32 Menu Item Adjustments / Configurations (alternatives) Channel List Skips the unwanted Analogue channels or edits Analogue channels (p. 39) Auto Setup Automatically sets the Analogue channels received in the area (p. 35) Manual Tuning Sets the Analogue channels manually (p. 40) Adds the TV mode •...
- Page 33 Menu Item Adjustments / Configurations (alternatives) Common Interface Uses include to watch encrypted channels (p. 46) Shipping Condition Resets all settings, for example, when moving house (p. 47) System Update Downloads new software to this TV (p. 48) Software Licence Displays the software licence information System Information Displays the system information of this TV Performs the update of the GUIDE Plus+ schedule and advertising information for the...
-
Page 34: Retuning From Setup Menu
Retuning from Setup Menu Automatically retune the channels received in the area. • This function is available if channel tuning is already performed. • Only the selected mode is retuned. • All the previous tuning settings are erased. • If Child Lock PIN number (p. 44) has been set, the PIN number is required. •... - Page 35 DVB-T or Analogue channels Select DVB-T or Analogue INPUT SD CARD (p. 14) MENU ASPECT DIRECT TV REC EXIT Display the menu MENU Select [Setup] OPTION RETURN select Main Menu Picture access TEXT STTL INDEX HOLD Sound Setup Select [DVB-T Tuning Menu] or [Analogue Tuning Menu] pqrs wxyz...
-
Page 36: Tuning And Editing Channels (Dvb)
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select DVB-C or DVB-T INPUT SD CARD (p. 14) MENU ASPECT DIRECT TV REC EXIT Display the menu MENU OPTION RETURN Select [Setup] select Main Menu TEXT... - Page 37 Add it to the Favourites list • To add continuous block of channels to the list at once DVB-C Favourites Editor Sorting 123... All DVB-C Channels Favourites1 make the block BBC One Wales BBC One Wales (yellow) BBC THREE CBBC Channel Cartoon Nwk BBCi BBC Radio Wales...
- Page 38 Set DVB channel manually [Manual Tuning] Normally use [Auto Setup] or [Update Channel List] to retune DVB channels. If tuning has not been done completely or for adjusting the direction of the aerial, use this function. • All channels found will be added to the Channel List. DVB-C : Enter the frequency Search...
-
Page 39: Tuning And Editing Channels (Analogue)
Tuning and Editing Channels (Analogue) You can retune channels or skip unwanted channels, edit channels etc. Select Analogue INPUT SD CARD (p. 14) MENU ASPECT DIRECT TV REC EXIT Display the menu MENU OPTION RETURN Select [Setup] select Main Menu TEXT STTL INDEX HOLD Picture... -
Page 40: Fine Tuning
■ To edit channels You can also edit each channel in Channel List. • To retune each channel ([Manual Tuning]) (red) (see below) • To move the channel position Select the new position Store (green) (green) • To rename the channel name Set characters (maximum : five characters) Store RETURN... -
Page 41: Timer Programming
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 20). -
Page 42: Set Timer Programming Event Details [Timer Programming
Set timer programming event details [Timer Programming] Start making the settings Select the function ([Ext Rec.] or [Reminder]) select [Ext Rec.] : to record the programme to the external recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. 2 minutes before the starting time, a reminder message appears if you are watching TV. -
Page 43: Child Lock
■ ■ To change a timer programming event To record with subtitles (if available) Select the programme to be changed Select the programme to record with subtitles select (yellow) Correct as necessary (p. 42) • Each time pressed : access auto ■... -
Page 44: Control Channel Audience [Child Lock
Control channel audience [Child Lock] Enter the PIN number (4 digits) • Enter the PIN number twice at first setting. Child Lock-PIN Entry • Please enter new PIN Make a note of the PIN number in case you forget it. •... -
Page 45: Input Labels
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. • To select the input mode (p. 23) Display the menu INPUT MENU SD CARD MENU ASPECT DIRECT TV REC... -
Page 46: Using Common Interface
Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. pay-TV). Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Side of the TV Caution •... -
Page 47: Shipping Condition
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings are reset (channels, picture, sound settings, etc.). • To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p. 34, 35) Display the menu INPUT MENU SD CARD... -
Page 48: Updating The Tv Software
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. If there is an update available, a notification banner is displayed when the channel has the update information. •... -
Page 49: Using Media Player
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. -
Page 50: Photo Mode
Photo mode Photo mode will read all “.jpg” extension files in the SD Card. The thumbnail of all the photos in the SD Card will be displayed. INPUT SD CARD Example : Thumbnail - [All photos] MENU ASPECT DIRECT TV REC All photos Media Player Photo... -
Page 51: Photo Settings
[Single view] - Photos are displayed one at a time. Select the file from the thumbnail of photos to be viewed select access Example : • • To display / hide the operation To operate Single view Single view guide To the previous photo Slideshow •... - Page 52 Menu Item Adjustments / Configurations (alternatives) Selects the colour effect of photos on Single view and Slideshow Colour Effect [Off] / [Sepia] / [Gray scale] • This function is not available when [Frame] is set to [Drift], [Gallery] or [Cinema]. Selects the transition effect for switching the photo during the slideshow [Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random] [Fade] : The next photo fades in gradually.
-
Page 53: Video Mode
Change the contents You can switch to the other mode of Media Player from the thumbnail view. While the thumbnail is displayed, Select the contents display the contents selection All photos Media Player Photo select (blue) access [Photo] “Photo mode” (p. 50) Contents Select [Video] “Video mode”... -
Page 54: Video Setup
■ How to operate in the playback Example : Playback • • To display / hide the operation guide and To change aspect 19/02/2010 11:21 00:15:39 00:02:05 information banner ASPECT • To the previous title / • To operate the playback scene Rewind EXIT... -
Page 55: Audio Output Settings
Audio output Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT terminal. • To confirm or change the current sound status “Confirm or change the current status” (p. 54) Display the menu Select [Sound] Select [SPDIF Selection] and set MENU Sound Menu Main Menu... -
Page 56: Music Setup
■ Playback from File view Selected file will be played back. Select the folder Select the file Start playback Example : Thumbnail - File view (red) Folder view > My Music_1 Media Player Music select access My Song_1 My Song_2 My Song_3 My Song_4 My Song_5... -
Page 57: Link Functions (Q-Link / Viera Link)
Use fully wired HDMI compliant cable. • Connect the equipment supporting VIERA Link to the TV’s HDMI1 or HDMI2 terminal via an HDMI cable. • About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment. -
Page 58: Viera Link (Hdmi And Audio Out Connections)
VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Blu-ray Disc theatre with Amplifier with VIERA Link Features VIERA Link function VIERA Link function function Preset download – – – ∗ ∗ Easy playback – Power on link – Power off link Reduce unnecessary power consumption ∗... -
Page 59: Power Off Link
Q-Link Preparations • Connect the DVD Recorder / VCR with the following logos : “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)” •... -
Page 60: Easy Playback
Control™” ∗ VIERA Link “ ∗ Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 57, 58). - Page 61 Reduce unnecessary power consumption in standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 30) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization with the TV On / Off state to reduce the consumption.
- Page 62 Pause Live TV programme [Pause Live TV] You can pause the live TV programme and resume later. Live TV programme will be recorded on HDD of the connected DIGA Recorder. • This function is available with DIGA Recorder which has HDD. •...
- Page 63 Control the menu of the connected equipment by VIERA remote control [VIERA Link Control] You can control some functions of the connected equipment with this TV remote control (point the remote control at the TV’s signal receiver). • If you cannot operate, check the settings and the equipment ...
-
Page 64: Operate The Menu Of The Equipment
Operate the menu of the equipment Available VIERA remote control buttons : (Depending on the connected equipment) Set the code of the remote control to “73” INPUT SD CARD “How to change the code for the type of the equipment” (p. 24) MENU ASPECT DIRECT TV REC... - Page 65 Speaker control [Speaker Selection] You can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). • If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 57, 58), “Preparations” (p. 60) Display [VIERA Link Menu] INPUT SD CARD...
-
Page 66: External Equipment
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 74, 75). Types of connectable equipment to each terminal Terminal DIGITAL AUDIO... -
Page 67: Hdmi Equipment
To watch DVDs (Listening) DVD Player (Viewing) HDMI equipment Recorder / Player Fully wired HDMI compliant cable • Camcorder HDMI connection (p. 70) Camcorder / Game equipment (Viewing) Camcorder (Listening) Game equipment To listen with speakers Optical digital audio cable Amplifier with RCA cable speaker system To enjoy the sound from the external equipment in... -
Page 68: Technical Information
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 17) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. -
Page 69: Media Player
Back up the recorded data at regular intervals in case of deteriorated or damaged data 24 mm or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.) Supported file format in Media Player ■... -
Page 70: Hdmi Connection
Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you reach the User input desired character. Name pqrs wxyz • A B C D E F G H K L M N O P Q R S The character is set automatically if you leave for 1 second. - Page 71 Input signal that can be displayed COMPONENT (Y, P ), HDMI Signal name COMPONENT HDMI 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p Mark : Applicable input signal PC (from HDMI terminal) Signal name...
-
Page 72: Faqs
Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned... - Page 73 Due to production process involved in this technology this may result in some pixels screen which are permanently lit or unlit. This is not a malfunction. • Follow the message’s instructions. • An error message appears If the problem persists, contact your local Panasonic dealer or the authorized Service Centre.
-
Page 74: Specifications
Playback of NTSC tape from some PAL Video recorders (VCR) following website. (English only) M.NTSC Playback from M.NTSC Video recorders (VCR) http://panasonic.jp/support/ NTSC (AV input only) Playback from NTSC Video recorders (VCR) global/cs/tv/ DVB-T Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) -
Page 75: Licence
LLC in the United States and other countries. • HDAVI Control™ is a trademark of Panasonic Corporation. • “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. • x.v.Colour™ is a trademark. • Manufactured under license from Dolby Laboratories. - Page 76 Declaration of Conformity (DoC) Authorized Representative : Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.