Zanussi ZKI 245 User Manual
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Washer/Dryer
  5. ZKI245
  6. User manual
Zanussi ZKI 245 User Manual

Zanussi ZKI 245 User Manual

Zanussi washer-dryer
Hide thumbs Also See for ZKI 245:
Table of Contents

Advertisement

Quick Links

User manual
EN
Washer-dryer
ZKI 245

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZKI 245

Summary of Contents for Zanussi ZKI 245

  • Page 1 User manual Washer-dryer ZKI 245...

  • Page 2: Table Of Contents

    Contents Safety information - - - - - - - - - - - - - - - - - - -2 Drying only - - - - - - - - - - - - - - - - - - - - - - -14 Description of the appliance - - - - - - - - - - - -4 Autodrying - - - - - - - - - - - - - - - - - - - - - - -15 Detergent dispenser drawer - - - - - - - - - - - -4...

  • Page 3: Child Safety

    not adhered to. See relevant section in the surface or the base are damaged so that the user manual. inside of the washer-dryer is accessible. After having installed the appliance, check ● that it is not standing on the inlet and drain Child safety hose and the worktop is not pressing the This appliance is not intended for use by...

  • Page 4: Description Of The Appliance

    Description of the appliance Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Prewash Wash Fabric Softener...

  • Page 5: Control Panel

    Control panel Information The control panel is illustrated above. It shows the programme selector dial as well as the different buttons, the pilot light(s) and the display. These are represented by relevant numbers which are explained in the table below. Programme selector dial EASY IRON button SPIN reduction button...

  • Page 6: Functions

    Functions Programme Selector Dial Easy Iron (Button 6) It allows you to switch the appliance on/off Selecting this option the laundry is gently and/or to select a programme. washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine Spin will perform some additional rinses depending It allows you to switch the appliance on/off...
  • Page 7 The display shows the following information: Incorrect option selection The incorrect option selection is indicated by 10.1 Duration of the programme the message Err displayed for a few seconds and by flashing of the red light of button After selecting a programme the duration of the selected programme appears in minutes Alarm codes or hours and minutes on the display .(e.g.

  • Page 8: Programme Table

    Programme table Programme/ Description of Type of laundry Options Temperature programme Main wash Spin Red. / Rinse Hold, Rinses, long spin -1400 COTTON White and coloured Super Quick( 90° - 60° - 40° - cotton (normally soiled Economy ), Easy Iron, 30°...

  • Page 9: Washing And Drying Hints

    Programme table Programme/ Description of Type of laundry Options Temperature programme Separate rinses cycle for hand washed cotton items. According to the Rinses, long spin at the Spin Red./ Rinse Hold, fabrics, it is possible to max speed - 1400 rpm RINSES choose a different speed Easy Iron, Extra Rinse...

  • Page 10: Removing Stains

    Removing stains To avoid a static charge when drying is com- pleted, use either a fabric softener when you Stubborn stains may not be removed by just are washing the laundry or a fabric conditioner water and detergent. It is therefore advisable to specifically for tumble dryers.

  • Page 11: Before The First Use

    quantities, can upset the delicate balance of Any fabric softener or starching additives must nature. be poured into the compartment marked The choice of detergent will depend on the before starting the wash programme. type of fabric (delicates, woollens, cottons, Follow the product manufacturer’s etc.), the colour, washing temperature and recommendations on quantities to use and do...

  • Page 12: Operating Sequence

    This function remains able also when the There are two different ways to set this option: washer-dryer is not working. before pressing the button ● To enable (disable) this option press it will be impossible to start the machine. simultaneously for about 6 seconds buttons after pressing the button ●...
  • Page 13 Before you make any change, you must pause button the washer-dryer by pressing button You can cancel the delay time at any moment, Changing a running programme is possible before you press button . If you have already only by resetting it. Turn the programme pressed it, and you wish to cancel the delay selector dial to «O»...

  • Page 14: Drying Only

    Before you empty out the water, the drum Remove the laundry from the drum and continues to run at regular intervals until the carefully check that the drum is empty. water draining. If you do not intend to carry out another wash, close the water tap.

  • Page 15: Autodrying

    7. Turn the selector dial to the « » position to switch the machine off. 8. Remove the laundry. Autodrying (NON-STOP programme) Warning! For NON-STOP programmes, the the flashing zero « ». (If you wish to open recommended load to wash and dry in your the door before or during the anti-crease washer-dryer is 3 kg for cotton and 2 kg for phase, please follow the instructions given...

  • Page 16: Drying Times

    Drying times Suggested drying Degree of drying Type of fabric Spin speed Load times in mins 4 kg 1400 rpm 140 - 160 Cotton and linen (bathrobes, 3 kg 1400 rpm 80 - 90 Suitable for bath towels, etc items to put 1.5 kg 1400 rpm 40 - 50...
  • Page 17 Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of Remove foreign bodies and fluff from the ● the recess. filter seat and from the pump impeller.

  • Page 18: What To Do If

    Clean the filter in the reposition the emergency emptying hose ● hose using a hard after having put the cap on again. bristle brush. When you intend to start the machine up ● Screw the hose back again, make sure that the room temperature ●...
  • Page 19 Malfunction Possible Cause / Solution The door has not been closed. • Firmly close the door. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. •...
  • Page 20 Malfunction Possible Cause / Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose;...
  • Page 21 Malfunction Possible Cause / Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume.

  • Page 22: Technical Data

    Malfunction Possible Cause / Solution The laundry is full of different colored fluff: The fabrics washed in the previous cycle released fluff of a different color (refer to “Fluff in the garments” in chapter “Use - Washing & Drying”). • The drying phase helps to eliminate some fluff. •...

  • Page 23: Consumption Values

    Consumption values Programme Water Energy Programme duration consumption consumption (in litres) (in kWh) 2.10 Cotton 90°C Cotton 60°C 01.2 1.02 Cotton 60°+ Economy selected Synthetics 60°C 0.90 Delicates 40°C 0.55 Handwash 40° 0.45 ) The Cotton 60° + the option Economy Information selected with a load of 6 kg is the reference programme for the data entered...
  • Page 24 5. Fill the smaller upper hole and the two large Installation on suspended flooring ones with the corresponding plastic plug Suspended wooden floors are particularly caps supplied in the bag containing the susceptible to vibration. instruction booklet. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws, the wood...
  • Page 25 2. This appliance must be connected to a cold When discharging into a standpipe ensure that water supply. Connect the hose to a tap the top of the standpipe is no more than 90 cm with a 3/4” thread. (35.4'') and no less than 60 cm (23.6'') above floor level.
  • Page 26 Special conditions Electrical connection If the floor is carpeted or covered with crumbly Any electrical work required to install this or soft material, insert a rigid support base appliance should be carried out by a qualified under the feet to prevent noise, vibration or electrician or competent person.
  • Page 27 WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. Should the appliance power supply cable need to be replaced, this MUST be carried out by our Service Force Centre.
  • Page 28 d) Counter-magnet (6) Drill four fixing holes see Fig. G. The appliance is pre-arranged for a magnetic closure of the door. To enable a correct opera- tion of this device, it is necessary to screw the counter-magnet (6) (steel disk + rubber ring) into the inner side of the door.

  • Page 29: Environmental Concerns

    Environmental concerns Packaging materials Ecological hints The materials marked with the symbol To save water, energy and to help protect the recyclable. environment, we recommend that you follow these tips: >PE<=polyethylene Normally soiled laundry may be washed >PS<=polystyrene ● without prewashing in order to save >PP<=polypropylene detergent, water and time (the environment This means that they can be recycled by...
  • Page 32 www.zanussi.com/shop...

Table of Contents