LG WP-1250 Owner's Manual

SPECIFICATION
W
Power source ON SPECIFICATION LABEL
H : 67 , M : 58 , L : 50 , S : 43
Water Level
Water Pressure Less than 100kPa (1kgf/cm
Dimension 850 X 530 X 1017 mm. (W X D X H)
For Non-Pump Model
Weight
For Pump Model
How to read the manufactured month and year from the label stuck on the
back of the product.
EX) 4 0 1 T W A A 0 0 0 0 1
Password code
Product code
Month
Year (The last digit to year)
Main service part list : Refer to below listed part name when you need
service call.
Part name
- WASH MOTOR
- SPIN MOTOR
- S.D. BASKET
- CYCLE TIMER ASSEMBLY
- CAPACITOR
- GEAR CASE ASM
CAUTION
CAUTION
Installation Area
Avoid area exposed to snow,
rain, or where humidity
is high. It may cause
electric shock.
Switch Area
Avoid watering on the
switch area.
It may cause
electric shock
or fire.
Volatile Material
Do not use volatile material such as
Benzene, Gasoline, bug killer.
Do not leave strong alkaline substance
such as bleach inside
the tub. Damage on
plastic surface and
rubber parts may occur.
Installation
Install the washing machine on
a horizontal support.
Otherwise,
it may cause
vibration and noise.
Be sure to earth the washer to prevent electric shock. To reduce
the risk of electric shock, do not install the washer in humid spaces.
Connecting the drain hose
Push the clamp toward the body of the washing machine as
shown in the figure.
For Non-Pump Model
Be sure to reroute the hose so that it is not kinked; kinks or sharp
bending in the hose will prevent proper drainage.
Make sure water is draineded smoothly by placing a base under
the machine or by applying other appropriate mean.
For Pump Model
L <= 1 m.
D
H
2 )
40.5 kg
41.1 kg
Serial No.
Remark
105 W (Output)
105 W (Output)
PLASTIC
P/No. : 3828EY3040A
8
Heat
Avoid electric heater, candle light,
cigarette light, bug smoker,
etc. near the machine.
It may ignite or
deform
plastic part.
Hot water
Avoid using hot water
over 50°C. It may
deform plastic parts
or cause malfunction.
In Operation
Do not insert the hand inside the spin
dryer basket while the machine is in
operation (Do not let children climb on
the machine or climb into
the tub. Injury may occur.)
Power Cord
If the power supply cord is damaged, it
must only be replaced by the
manufacture or its service agent or a
similarly qualified person in order to
avoid a hazard.
Electric Outlet
Avoid connecting several electric
devices to single outlet. It may cause
fire.
2
FEATURES
Pulsator Table
Use for WP-****Q(S)(P)
Use for WP-****R(S)(P)
WP-1100QS
1. Water Supply Inlet
Connect here with the inlet hose from the
water faucet to feed water to the tub.
2. Water Selector
Select "WASH" to supply water for
washing and rinsing and "SPIN" for spin
shower rinse.
3. Wash Timer
Select the desired time for washing or
rinsing.
4. Wash Program
Set the program to "GENTLE","NORMAL",
"STRONG" according to kind and
L
quantity of the laundry.

Washing Machine

OWNER'S MANUAL
MODEL : WP-1250(Q,R)(S)(P)
WP-1270(Q,R)(S)(P)
WP-1280(Q,R)(S)(P)
WP-1350(Q,R)(S)(P)
WP-1380(Q,R)(S)(P)
WP-1100QS
Please read the operating instructions carefully
and thoroughly before installing and operating
your washing machine.
This washing machine is designed and manufactured
for household use only.
WASHING
COVER
WATER SUPPLY
SELECTOR LEVER
OVER FLOW
FILTER
ROTATION
FILTER-C
TUB
PULSATOR
(See detail in Pulsator Table)
3 4 5 6
1
Off
WASH
Wash Timer Wash Program Water Supply Selector Drain Selector Spin Timer
2
5. Drain Selector
For Non-Pump Model
Select "WASH RINSE" for washing and
rinsing and "DRAIN" to drain the water out
of the tub.
For Pump Model
Select "WASH RINSE" for washing, rinsing
and turn off the drain pump and "DRAIN" to
drain the water out of Cabinet, and "OFF" to
turn off the drain pump.
6. Spin Timer
Select the desired time for spinning. The
maximum limit is 5 min. Don't rotate the knob
more than prescribed limit.
3
Specification
(Q,R) : Pulsator Type
(S) : See Through Cover Only
(P) : Pump Model Only
*For Pump
Model only*
DRAIN HOSE
SPIN DRYER
COVER
SAFETY
COVER-2
SPIN DRYER
BASKET
EARTH WIRE
(For models with
two prong plug)
SAFETY
COVER-1
POWER CORD
**For pump model only**