Answering system
Answering system settings
5. Press q
or p
CID
•
Toll saver - the answering system answers a call after 2 rings if you
have new messages, and after 4 rings when there are no new messages.
This feature allows you to check for new messages and avoid paying
long distance charges when calling from out of your local area.
/SELECT to save the setting. You hear a confirmation tone.
6. Press
MENU
CANCEL to cancel.
Press
OFF/
NOTES:
•
If you subscribe to voicemail service through your telephone service provider, see Answering
system and voicemail indicators on page 50.
•
If you set the number of rings for the answering system as 2 or 3 rings, the caller ID announce
feature may not have enough time to announce the caller's full information.
Remote access code
To access your answering system remotely from any touch-
tone phone, you need to enter a two-digit number (00-99).
Unless you change it, the remote access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q
or p
CID
/SELECT.
press
MENU
3. Press q
or p
CID
/SELECT.
press
MENU
4. Press q
or p
CID
/SELECT.
MENU
5. Use the dialing keys to enter a
/DELETE to backspace and delete a digit.
MUTE
/SELECT to save the setting. You hear a confirmation tone. Press
6. Press
MENU
CANCEL to cancel.
OFF/
to scroll and choose among 2, 3, 4, 5, 6 or Toll saver.
DIR
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to scroll to >Remote code, then press
DIR
two-digit number. Use
SELECT
48
Play messages
>Answering sys
p
q
to
Answer ON/OFF
>Ans sys setup
p
q
REMOTE CODE
19