Telephone operation
Options while on calls
Volume control
While on a call, press
increase the listening volume. You
six levels.
NOTES:
•
Handset and speakerphone volume settings are independent.
•
When the volume reaches the minimum or maximum setting, you hear 2 beeps.
Call waiting
If you subscribe to call waiting service from your telephone service provider,
you hear 2 beeps if someone calls while you are already on a call. Press
FLASH to put your current call on hold and take the new call.
PHONE/
FLASH at any time to switch back and forth between calls.
Press
PHONE/
NOTE: Missed call waiting calls are not counted as missed calls.
Mute
Use the mute function to turn off the microphone. You
can hear the caller, but the caller cannot hear you.
To mute a call:
• While on a call, press MUTE/
the handset screen shows Muted for a few seconds
and MUTE displays until you turn off mute.
To end mute a call:
• Press MUTE/
Microphone ON appears temporarily on the
handset screen.
/VOLUME to decrease or press
qCID
again. When mute is off,
DELETE
can set the listening volume to one of
p
/VOLUME
DIR
q
/VOLUME
CID
. When mute is on,
DELETE
22
/VOLUME to
pDIR
MUTE/
DELETE
Muted
MUTE
10/15
10:01
Phone
0:00:30
Microphone ON
p
q
10/15
10:01
AM
AM