JBL Soundfly Air Quick Setup Manual

JBL Soundfly Air Quick Setup Manual

Plug-in airplay speaker

Advertisement

JBL SoundfLy
Plug-in AirPlay speaker
Quick Setup Guide
AiR
Welcome
Thank you for purchasing the JBL Soundfly™ Air plug-in AirPlay
speaker. Soundfly Air will fill your room with sound from your iPod,
iPhone, iPad, Mac or PC computer with iTunes, while plugging directly
into an AC outlet and remaining practically invisible.

Included Items

JBL Soundfly Air
Unit
AC Plug Adapter
(varies with region)
Support Pad
(varies with region)

Advertisement

Table of Contents
loading

Summary of Contents for JBL Soundfly Air

  • Page 1: Included Items

    Welcome Thank you for purchasing the JBL Soundfly™ Air plug-in AirPlay speaker. Soundfly Air will fill your room with sound from your iPod, iPhone, iPad, Mac or PC computer with iTunes, while plugging directly into an AC outlet and remaining practically invisible.
  • Page 2: Plug Into An Ac Outlet

    AIr on And off * If multiple adapters are supplied, use the one that provides the most SLEEP secure fit in the AC outlet. ECO-STANDBY 3 sec. Note: Soundfly Air will automatically enter the Sleep mode after 10 minutes of inactivity.
  • Page 3: Join With Wi-Fi Network

    JoIn soundfly AIr WItH your WI-fI ® 2. Touch the Wi-Fi logo button for at least three seconds. The button’s LED will alternately flash green and amber and Soundfly Air will be in netWorK the Connect mode. Before you can stream audio to your Soundfly Air via AirPlay, you will need to join your Soundfly Air with your home Wi-Fi ®...
  • Page 4 4. Once the iPod, iPhone or iPad is connected to the “JBL Soundfly 5. Once the configuration is complete, Soundfly Air will connect to your Air” network, open the device’s Web browser (Safari, Firefox, Internet home Wi-Fi network, and its Wi-Fi button LED will change to solid Explorer, etc.) and enter the following Web address: 192.168.1.1.
  • Page 5: If Wi-Fi Connection Was Unsuccessful

    “JBL Soundfly Air” in the speaker-selection list that appears. • If Soundfly Air is in the Sleep mode when you press Play in iTunes or on the iPod, iPhone or iPad, Soundfly Air will automatically turn on, and begin playing the streaming audio.
  • Page 6 NOTE: The JBL Soundfly App also allows you to change the EQ setting to get the best sound wherever you plug in Soundfly Air. 4. Plug Soundfly Air back into the wall outlet and wait until the power LED illuminates solid white.
  • Page 7: Troubleshooting

    Soundfly Air. device. • Set the EQ on the device to “Off”. Loud hum or buzzing There is a ground loop with the AC • Unplug Soundfly Air and plug it into wiring. a different AC outlet. www.jbl.com...
  • Page 8: Specifications

    sPecIfIcAtIons Amplifier power: 10 watts x 2 Frequency response: 60Hz – 20kHz Signal-to-noise ratio: 80dB Power requirement: 100V – 240V AC, 50Hz/60Hz Power consumption: <0.5W (standby); 30W (maximum) Dimensions (W x H x D): 7-1/2" x 2-13/16" x 3-5/8" (71mm x 92mm x 190mm) Weight: 0.9 lb (0.42kg)
  • Page 9: Important Safety Instructions

    IMPORTANT OPERATING AND MAINTENANCE PRESENCE OF UNINSULATED “DANGEROUS WARNING: TO REDUCE THE RISK OF FIRE SOUNDFLY AIR is in compliance with the essential requirements and other relevant SERVICING INSTRUCTIONS IN THE LITERATURE VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS ACCOMPANYING THE PRODUCT.
  • Page 10 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2012 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Soundfly is a trademark of HARMAN International Industries, Incorporated.

Table of Contents