Frigidaire FAA065P7A2 Installation Instructions

u m
READ BEFORE iNSTALLING UNIT
MS ni Window Mounting
Your ah"conditioner is desigl_ed to install in skmdard
double lumg windows with opening widths ol 22 to 36
inches (559 mm to 914 ram) (FIG. l)
Lower sash must open suificiemly to allow a clear vertical
opening of 14-1/2 inches (368 ram). Side louvers and the
rear of the AC must have clear air space to allow
enough airllow through the condensel; hn" heat removal.
The rear of the unit must be outdoors, not inside a
building or garage°
When handling unit, be careful to avoid cuts
f?om sharp metal edges and aluminum fins on
front and rear coils.
Beibre installing unit, the top rail must be
assembled on the unit.
_lbp Rail Hardware Qty.
3/8" Screw 4
Top Rail 1
NOTE: SAVE CARTON and these INSTALLA-
TiON iNSTRUCTiONS fin: fmnre reference. The caJlon is
the best way to store unit during wimer, or when not h_ use.
Some assemNy is required. Please read these instructions
Mounting Hardware
3/4 'screws
lock frame
sash lock
TOOLS NEEDED:
• Drill (if pik)t hales are needed)
Qty.
7
TOOL NEEDED:
* PhilBips Screwdriver
A. Remove the air
conditioner flTomthe
cmlon and place on a
flat surface.
B. Remove top rail from
tlle bottom of the
packaging material as
shown in Fig. A
C. Align the hole in the
the top of the unit as
shown in Fig. B
D. Secure the top raiI to
rite unit with the 3/8"
Screws as shown in
Fig. (7
Packagitlg .
Top Rail
Fig. A
NOTE: FOR SAFETY REASONS, ALL
FOUR (4) SCREWS MUST BE SECURELY
FASTENED.