Crosley CAE5M13 Installation Instructions

|nstailation instruct"
READ BEFORE iNSTALLiNG UNiT
OPP5K Window Mounting
Your air conditioner is designed to install in standard
double hung windows with opening widths of 23 to 36
inches (584 mm to 914 mm) (FIG, 1)
Lower sash must open sufficiently to allow- a clear vertical
opening of 14-1/2 inches (368 ram). Side louvers and the
rear of the AC must have clear air space to allow
enough airflow through the condensel; for heat removal.
The rear of the unit must be outdoors, not inside a
building or garage.
NOTE: SAVE CARTON and these ]INSTALLATION
INSTRUCTIONS fin future reference. The carton is the
best way to store unit during winter, or when not in use.
Some assembly is required, Please read these instructions
carefully.
Mounting Hardware
3/4"screws
lock flame
sash lock
Qty.
7
When handling unit, be careful to avoid cuts
from sharp metal edges and aluminum fins on
front and rear coils.
Before installing unit, the top rail must be
assembled on the unit.
Top Rail Hardware Qty.
3/8" Screw- 4
Top Rail 1
TOOL NEEDED: __ T°'_' aiit
* Phillips Screwdriver
_z
A, Remove the air
conditioner from the Packa
carton and place on a
flat surface, [Zig. A
B. Remove top rail from
the bottom of the
packaging material as
shown in Fig. A
C. Align the hole in the
top rail with those in
the top of the unit as
shown in Fig. B
D, Secure the top rail to
the unit with the 3/8"
Screws as shown in
Fig. C
Fig._
TOOLS NEEDED:
, Phillips Screw Driver
* Drill (If pilot holes are needed)
NOTE: FOR SAFETY REASONS, ALL
FOUR (4) SCREWS MUST BE SECURELY
FASTENED.
1 P/N 66129901121