Life Fitness LIFECYCLE C1 Owner's Manual
Upright lifecycle exercise bikes
Hide thumbs
Also See for LIFECYCLE C1:
- Owner's manual (25 pages) ,
- Base user manual (22 pages) ,
- Assembly instructions (2 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Life Fitness LIFECYCLE C1
Summary of Contents for Life Fitness LIFECYCLE C1
- Page 1 C1 / C3 UPRIGHT LIFECYCLE® EXERCISE BIKES Owner’s Manual 8974901 REV B-2...
- Page 3 5100 River Road Schiller Park, Illinois 60176 • U.S.A. 847.288.3300 • FAX: 847.288.3703 Service phone number: 800.351.3737 (toll-free within U.S.A., Canada) Bijdorpplein 25-31 Siemensstraße 3 2992 LB Barendrecht 85716 Unterschleißheim 5100 N River Road THE NETHERLANDS GERMANY Schiller Park, IL 60176 U.S.A Telephone: (+31) 180 646 644 Telephone: (+49) 89.31 77 51.0 (Germany) Telephone: (847) 288 3300...
- Page 4 FCC Warning - Possible Radio / Television Interference Note: Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •...
-
Page 5: Table Of Contents
C1 / C3 Upright Lifecycle ® Exercise Bike Overview ....... . - Page 6 C1 / C3 Thank you for purchasing a Life Fitness bike. Before using this product please read this user manual in its entirety to ensure that you have the knowledge to safely and properly operate all of the features on your bike. We hope you...
-
Page 7: Important Safety Instructions
Never insert objects into any openings in this product. If an object should drop inside, turn off the power, unplug the power cord from the outlet and carefully retrieve it. If the item cannot be reached, contact Life Fitness Customer Support Services. - Page 8 • Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact Life Fitness Customer Support Services. • Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
-
Page 9: C1 / C3 Upright Lifecycle ® Exercise Bike Overview
® E C1 / C3 U PRIGHT IFECYCLE XERCISE VERVIEW Contact Heart Rate Sensors Water Bottle Holder Seat Adjustment C1 with Track Console Pedal Leveler Contact Heart Rate Sensors Seat Adjustment C3 with Track Console Pedal Leveler... -
Page 10: Assembly
SSEMBLY & H OOLS ARDWARE Identify the following components after unpacking your Lifecycle. The tools needed for assembly are included. Quantity Item Description 50mm Button Head Screw 20mm Button Head Screw 100mm Hex Head Bolt Thick Flat Washer - 16mm O.D. 60mm Hex Head Bolt 12mm Small Head Phillips Screw Flat Washer - 12mm O.D. - Page 11 50mm Button Head Screw 20mm Button Head Screw 100mm Hex Head Bolt 60mm Hex Head Bolt 12mm Self-Tapping Screw Nylock Nut (on seat) Flat Washer (on seat) Thick Flat Washer -16mm O.D. Flat Washer -18mm O.D. Flat Washer -12mm O.D. 15mm Button Head Screw 6mm Phillips Screw with Locking Compound 8mm Phillips Screw...
-
Page 12: Packaging
ACKAGING Parts: None Remove all packaging and place main components to the side of the box. Break box down in each of the four corners. SSEMBLE THE TABILIZER Parts: Hardware Bag #1 (2, 50mm Button Head Screws) (2, 20mm Button Head Screws) Tools: 5mm Hex Head Wrench Locate and install the two LEVELER FEET (A) to the bottom of the REAR STABILIZER (B).With the bends facing rear- ward, attach the REAR STABILIZER (B) to the BASE UNIT (C) using two 50mm BUTTON HEAD SCREWS (1) from the... -
Page 13: Connect Wiring / Attach Cover
ONNECT IRING TTACH OVER Parts: Hardware Bag #3 (4, 12mm Phillips Screws) (4, Flat Washers) Tools: Phillips Screwdriver Detach the WIRE TIE (H) attached to the front of the MONOCOL- UMN (E). Carefully pull the CONSOLE WIRE (L) through the SIDE ACCESS HOLE (M) of the MONOCOLUMN (E). -
Page 14: Accessory Trays And Console
CONSOLE BRACKET (W) using four 12mm SELF TAPPING SCREWS (17). Tighten the SCREWS securely. Do not overtighten the SCREWS. C1 Only: Remove the DISPLAY CONSOLE (AA) from its shipping carton. While holding the CONSOLE WIRE (X) and HEART RATE WIRE (Y), cut the wire tie securing the CONSOLE WIRE to the DISPLAY CONSOLE BRACKET (W). -
Page 15: Assemble The Handlebar
SSEMBLE THE ANDLEBAR Parts: Hardware Bag #6 (4, 15mm Button Head Screws) (4, Flat Washers) Tools: 5mm Hex Head Wrench Locate the HANDLEBAR ASSEMBLY (CC). With the handlebars facing forward, position the HANDLEBAR ASSEMBLY near the top of the MONOCOLUMN (E). Connect the WIRES (DD) leading from the HANDLEBAR ASSEMBLY and the MONOCOLUMN. -
Page 16: Pedals
The PEDAL STRAP should securely engage the strap adjustment clip. Install the RIGHT PEDAL (EE) to the USER RIGHT CRANK ARM (GG). Repeat for the LEFT PEDAL (marked with an "L") and PEDAL STRAP (marked with an "L"). Note Note: 3.10 C1 W & B ATER OTTLE OLDER RACKET... -
Page 17: Initial Setup
NITIAL ETUP Read the entire User Manual before setting up the Lifecycle exercise bike. HERE TO LACE THE XERCISE Following all safety instructions in Section 1.1, move the bike to the location in which it will be used. See Section 7, for the dimensions of the footprint. - Page 18 OW TO DJUST THE EDAL TRAPS The bike pedal safety straps keep the user's shoes on the pedals during a workout. The straps should fit comfortably, but they also should be tight enough to prevent shoes from slipping at any point in the pedaling rotation. Before working out, the user should test and adjust the tightness of the straps.
-
Page 19: Main Features
Two accessory trays (A) are mounted above the handlebars on the C3 to provide storage for items such as water bottles, personal stereos, and cell phones. A Water Bottle Holder (B) is located on the monocolumn of the C1. Additionally, an integrated Reading Rack (C) for supporting a book or magazine is located at the base of the console. -
Page 20: Service And Product Maintenance
& P ERVICE RODUCT AINTENANCE ROUBLESHOOTING Problem Cause / Solution Check to see that the power cord is fully plugged into the back of the Lifecycle exercise bike and into the wall. Make sure the power cord is fully seated into the back of the Lifecycle exercise bike. You may be in “Energy Saver Mode”. -
Page 22: Preventive Maintenance Tips
REVENTIVE AINTENANCE The Life Fitness Lifecycle exercise bike is backed by the engineering excellence and reliability of Life Fitness and is one of the most rugged and trouble-free pieces of exercise equipment on the market today. Note: The following preventive maintenance tips will keep the Life Fitness exercise bike operating at peak performance: •... -
Page 23: Preventive Maintenance Schedule
BTAIN RODUCT ERVICE 1. Please contact your dealer or Life Fitness Customer Service at 1-800-351-3737. 2. Verify the symptom and review the operating instructions and troubleshooting matrix. 3. Locate and document the serial number of the unit . The serial number plate is located on the front stabilizer, below the Please also have proof of purchase information available. -
Page 24: Specifications
Drive Type: Poly -V belt-drive Power Requirements: 120 Volt (U.S.), 220 Volt (Europe), 240+ Volt (Australia) Note Accessories: Water Bottle Holder & Reading Rack (C1) Two Accessory Trays & Reading Rack (C3) Resistance System: Eddy Current (C1) Generator (C3) Note:... -
Page 25: Warranty Information
WHO PAYS SHIPPING & INSURANCE FOR SERVICE: If the Product or any warranted part must be returned to a service facility for repairs, Life Fitness will pay all shipping and insurance charges during the warranty period (within the United States only). The purchaser is responsible for ship- ping and insurance charges after the warranty has expired. - Page 26 Product. Some states do not allow the exclusion or limitation of implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions may not apply to you. Warranties may vary outside the U.S. Contact Life Fitness for details. CHANGES IN WARRANTY NOT AUTHORIZED: No one is authorized to change, modify or extend the terms of this limited warranty.