Dvd System Setup; General Setup Process - Haier HLC22E User Manual

DVD System Setup

DVD System Setup
SETUP
PLAY/ENTER
SETUP
PLAY/ENTER

General Setup Process

1.Press the setup button, the
general set up page will be
displayed press twice the
preference page will be displayed
2.Press CH+/- b or to select, the
item, then press to enter the
submenu.
or
3.Press CH+/- bu to select then
press PLAY/ENTER to confirm.
4.Press SETUP repeatedly to
exit the set-up menus.
NOTE: Preference page will be
displayed when there is no DVD in
the unit.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
The following information applies only
when the DVD output is connected to an
external TV.
4:3/PS (PS = Pan and Scan)
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4:3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV . Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16:9
You may select this if you have a widescreen (16:9) TV . Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
..General Setup Page..
4 3/Ps
Tv Display LB
Angle Mark On 4 3/Lb
Osd Lang ENG 16 9
Caption On
Screen Saver Off
..Preference Page..
Parental
1 Kid Saf
2 G
Password
3 Pg
Default
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
..General Setup Page..
Tv Display LB 4 3/Ps
Angle Mark On 4 3/Lb
Osd Lang ENG
16 9
Caption On
Screen Saver Off