Haier PRCS25 Series User Manual page 15

Function
(Only applicable to PRCS25TD** series)
(Only applicable to RRCS25SD** series)
When the Water Filter Indicator (V) is lit, the water filter needs to be replaced. After you replace the water
filter, press U to indicate that the water filter was reset. The Water Filter Indicator (V) will turn off.
When you change the water filter, please refer to the "Water Filter" section of this manual.
NOTE
Display Control Function
30 seconds after pressing an operation button, the display turns off automatically. Press any button or open
any door to light up the display again.
Fault Display
If the display is broken but you still hear accompanying noises when you press a button, this means the
buttons are still working. However you should call an after-sales service engineer to fix the problem to
ensure optimum performance.
open Door Alarm
The refrigerator will sound an alarm automatically if any door or drawer is open for over 60 seconds. The
alarm will turn off when the door or drawer is closed.
Sabbath Mode
When the refrigerator is in the locked status, press the Lock Button for 3 seconds. The buzzer will sound.
All cooling functions will remain in place but lights and alarms will shut off when you open the doors or when
you get ice and water. To turn the lights and alarm back on, press the Lock Button for 3 seconds again. You
will hear another buzzer and lights and alarms will resume working.
Demo Mode
PRCS25eD/tD models:
1. Compressor and fan motors do not operate in the Demo Mode.
2. On the upper freezer side control panel: Press the "Cold" and "Colder" Buttons at the same time for 3 seconds,
it will then enter the demo mode when you hear the buzzer sound and the cabinet display panel will show 2
dashed lines.
3. The display panel on the door appears as usual.
PRCS25SD model:
1. The compressor and fan motors will not work in the Demo Mode.
2. Press the Freezer Button for 20 seconds, then it will enter the Demo Mode when you hear a buzzer and all the
LED's on the control boards will shut off.
3. The dispenser display panel on the door appears as usual.
Be sure to reset to standard operations mode BACK the same way (pressing again either 3 or 20
seconds) when making consumer sale.
NOTE
14