Casio 3277 Operation Manual

MA1206-EA
About This Manual
E
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-7
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-10
To toggle between 12-hour and 24-hour timekeeping ....................................... E-11
To view the time for another city code ................................................................ E-12
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-13
To measure times with the stopwatch ................................................................. E-15
To use Auto-Start .................................................................................................. E-16
To confi gure the countdown timer ...................................................................... E-20
To use the countdown timer ................................................................................. E-22
To set an alarm time .............................................................................................. E-25
E-2
General Guide
Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
E-4
Timekeeping
Month – Day
Day of week
PM indicator
Hour : Minutes Seconds
E-6
3. When the setting you want to change is fl ashing, use
described below.
Screen
Reset the seconds to
Toggle between Daylight Saving Time
( ) and Standard Time (
Specify the UTC offset
Change the hour or minutes
Change the year
Change the month or day
For details about the UTC offset, see the "City Code Table" at the back of this
manual.
See "Daylight Saving Time (DST)" on page E-9 for details about DST setting.
The UTC offset setting range is –12.0 to +14.0, in 0.5-hour units.
E-8
Operation Guide 3277/3404
Depending on the model of your watch, display text
appears either as dark fi gures on a light background or light
fi gures on a dark background. All sample displays in this
manual are shown using dark fi gures on a light background.
Button operations are indicated using the letters shown in
the illustration.
Each section of this manual provides you with the
information you need to perform operations in each mode.
Further details and technical information can be found in
the "Reference" section.
World Time Mode
C
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select the UTC offset before you set the time and date.
D and B to change it as
To do this: Do this:
Press D.
Press D.
)
Use D (+) and B (–).
Use D (+) and B (–).
Contents
General Guide .......................................................................................................... E-4
Timekeeping ............................................................................................................. E-6
World Time ............................................................................................................. E-12
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-17
Alarms .................................................................................................................... E-23
Illumination ............................................................................................................ E-30
Reference ............................................................................................................... E-31
Specifi cations ........................................................................................................ E-37
To test the alarm .................................................................................................... E-27
To turn an alarm on and off .................................................................................. E-28
To turn the Hourly Time Signal on and off .......................................................... E-29
To illuminate the display ....................................................................................... E-30
To specify the illumination duration .................................................................... E-30
To turn Flash Alert on and off .............................................................................. E-32
To turn the button operation tone on and off ..................................................... E-33
Stopwatch Mode
C
To set the time and date
UTC Offset
C
Seconds
C
Flash Alert
C
When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in
0.5-hour units.
For information about Flash Alert, see "Flash Alert" (page E-32).
A to exit the setting screen.
4. Press
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
Countdown Timer Alarm Mode
Mode
C C
C
1. In the Timekeeping Mode, hold down
seconds start to fl ash, which indicates the setting
screen.
C to move the fl ashing in the sequence shown
2. Press
below to select other settings.
C
DST UTC Offset
Day Month Year
C C
E-1
E-3
E-5
A until the
C
Hour
C
Minutes
C
E-7
E-9