American Standard Allbrook FloWise 0.5 6550.005 Specification Sheet

BARRIER FREE
ALLBROOK FloWise™ 0.5
®
HIGH EFFICIENCY URINAL
• Vitreous china
• High Efficiency (1.9 Lpf/0.5 gpf)
• Flushing rim
• Siphon jet flush action
• 3/4" inlet spud
• Outlet connection threaded 2" inside (NPTF)
• Wall hanger
• Fixture only
• Meets ANSI flush requirements at 0.5 GPF
❏ 6550.005 Top spud
Nominal Dimensions:
356 x 356 x 546mm
(14" x 14" x 21-1/2")
Recommended working pressure – between
20 psi at valve when flushing and 80 psi static
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen
❏ Black
❏ Flush Valve:
❏ American Standard Selectronic
DC Power (Top Spud)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USEABLE BUILDINGS AND
FACILITIES - CHECK LOCAL CODES.
When installed so top of rim is 432mm (17") from finished floor.
© 2008 AS America Inc.
#6063.051.002
™
NOTES:
FLUSH VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
M97
ALLBROOK™ FloWise
HIGH EFFICIENCY URINAL
FINISHED
WALL
292mm
(11-1/2)
57mm
(2-1/4)
292mm
(11-1/2)
356mm
(14)
203mm
16mm (8)
(5/8)
C/L OF
OUTLET
432mm
(17)
2" N.P.T.
610mm
FEMALE
(24)
OUTLET
CONNECTION OPTIONAL
TO FINISHED
FLOOR
®
VITREOUS CHINA
121mm
(4-3/4)
3/4" S.P.S. OR
C.W.T. SUPPLY
3/4
TO FLUSH VALVE
SPUD
HANGER
359mm
C/L
(14-1/8)
546mm
(21-1/2)
356mm
(14)
102mm
(4)
10mm
GASKET
(3/8)
102mm
16mm
(4)
(5/8)
2" N.P.T.
INSIDE THREADS
FINISHED WALL
DETAIL OF OUTLET CONNECTION
Revised 11/08
0.5