Thank you for purchasing on “My DIGIZON.” For the first installation, please fully understand entire content and description. We will guide you through the installation setup program process and you will have the boundless enjoyment. I. DIGIZON Introduction A) Checklist / p. 1 B) System Requirement / p.
MY DIGIZON USER MANUAL I. DIGIZON Introduction A) Checklist B) System Requirement 1. Source:Cable TV (NTSC/PAL) 2. Network Connection a. ADSL/WiMAX (Minimum transmission bandwidth: 256Kbps) b. IP Sharing Device/Router (Wired Network) Ethernet Cable (Product accessories included, please refer to Checklist.) 3.
MY DIGIZON USER MANUAL II. Watch TV on PC A) PC Player Installation Step 1. Insert the installation CD and installation will start automatically. If not, please double click the icon named “Setup” in the root directory. Step 2. Language Selection: English/Korean/Japanese/Traditional Chinese. Step 3.
MY DIGIZON USER MANUAL B) About PC Player Step 1. Click the desktop shortcut of “My DIGIZON,” and the panel shows. C) Player and Control Panel Function Connect to DIGIZON/Disconnect from DIGIZON Video Source:Only Cable TV supports Dropdown menu Channel setting Numeric pad Last choice;...
MY DIGIZON USER MANUAL D) Connect to DIGIZON Step 1. Power on the router/AP and DIGIZON. Step 2. Make sure the Ethernet cable is well connected. Step 3. Click “Connect.”( Step 4. Enter DIGIZON ID which is labeled at the bottom of DIGIZON box and password.
Page 8
MY DIGIZON USER MANUAL Step 3. It takes 5 to 10 minutes to scan. And you can enable “Mute” during scanning. Step 4. Click “Apply/Exit” when Finish.
MY DIGIZON USER MANUAL F) Start to Watch TV Switch channels 1-1 Using dropdown channel list. 1-2 Using the numeric pad and enter the number of channel which you want to watch, and press or wait about 5 seconds, then it will switch channel automatically.
MY DIGIZON USER MANUAL Volume Control (Volume down), (Volume up),or up/down to control volume. 2-2 Using right/left key on keyboard can control volume as well. G) Disconnect from DIGIZON Click “Disconnect”( ) or press on the top right corner of the player and will disconnect from DIGIZON.
MY DIGIZON USER MANUAL III. Advanced Setting A) Channel Setting (Click 1. Name channel: Select the channel from the list, and enter channel (in 22 characters) and press “Set” to confirm the setting. Enable/Disable the channel: The disabled channel is still on the list, and you can enable it whenever you need.
MY DIGIZON USER MANUAL (from Network Setting Step 1. The settings are for remote use through internet. Step 2. Assign the IP and DNS address for DIGIZON, if necessary. Step 3. Internet Connection Test : Press “Start Test” to test internet connection.
MY DIGIZON USER MANUAL [10] C) Preference Set the comfortable brightness and contract.設定亮度及對比 Speed Test Select “Speed Test”, it will take about 1 minute to test, and it will show the internet speed. Player Setting Step 1. When speed test finished, user will find internet condition, then choose the best video/audio quality for DIGIZON.
MY DIGIZON USER MANUAL [11] Step 2. User Define: Click “Set Parameter” and start to set video (bitrates, resolution, frame rate), audio (bitrates). When finish setting, press “OK” to confirm the configuration. Step 3. Back to main interface of preference, and click “Apply/Exit”to confirm the configuration.
MY DIGIZON USER MANUAL [12] Set Guest Time Enter limit time for guest to log in and press “OK” to confirm. Management-reboot, set guest time, set com. Port, set alias. E) About Click “About” and it will show the version of DIGIZON player and firmware. The system will inform user to upgrade the firmware, if the version of player or firmware is not the latest one.
MY DIGIZON USER MANUAL [13] Appendix A. Setting UPnP and DMZ (Connection) Set DMZ Internet Test Connect! Set Router and Port Internet Test Connect! Set UPnP Step 2. Setting DIGIZON PC Player Step 1. Router Setting Network Setting UpnP Enter router setting interface,and enable the Setting ...
Page 17
MY DIGIZON USER MANUAL [14] Set DMZ Internet Test Connect! Set Router and Port Internet Test Connect! Set UPnP Step 2. Set Router Step 3. Set DIGIZON PC Player Enter Router setting interface and Virtual Server ManagementSet Com. setting。 Port (Default:40001) If Router reboot or other unknown reason make IP changed, please reset from step 1.
Need help?
Do you have a question about the DIGIZON 211P and is the answer not in the manual?
Questions and answers