-Thewashing machine isheavy. TO AVOID R ISK O F INJURY liftwith caution. -Erozen h oses c an tear/burst. Donotinstall thewashing machine outdoors orinanarea Water supply hoses for Power cord exposedtofreezing conditions. hot water (red marking) --These i nstallation instructions are intended foruse byqualified installers. Inaddition tothese instructions, ifinstalling the washing machine:...
Page 3
- Before using the appliance for the first time, remove all the transportation Water supply hose: protection devices and retain for subsequent transportation of the Attention: The water supply hose must not be kinked, bent or flattened in such a way as to appliance.
Page 4
Make sure that: Strong odor. vibrations and "walking" can be the result of incorrect leveling! - the power Iqlug fits into the socket. _ the wire size is sufficient. -- the grounding system is properly installed. The ROwercord may be re_laced bY an electrician OnlYl Replacement power cords are available Loosen counter nut with wrench counterclockwise.
Page 5
Before calling customer service, please check whether you can eliminate the fault yourself. _> operating instructions, What to do if... User information explained in the instructions provided and troubleshooting issues found in the Operating Instructions "What to do if.." section may not be covered by warranty service. Please carefully rule any of these issues before calling for service, Contact information for customer service is found in list or via our website ->...