Change Of The Default Setting Of The Chemical Form; Basic Test-Specific And Sample-Specific Data Settings - Hach DR 5000 User Manual

Standard Operations

5.5.3.1 Change of the default setting of the chemical form

5.5.4 Basic test-specific and sample-specific data settings

Options
More
Store Off/On
Abs % Trans
52
1. In the result display, press Options>More>Chemical Form.
2. Select the required chemical form and press OK to confirm.
1. Insert the blank or sample cuvette/vial (depending on the
2. In the result display, press Options>More>Chemical Form.
3. A list of available evaluation forms appear. Select the new
4. Press Save as Default.
The current result and all further measurements will be displayed in
the new chemical form.
Press Options to change test or sample specific settings.
Table 5 Barcode program options
Description
For further Options
With the Store On setting, all measurement data are stored automatically. With the Store Off
setting, no measurement data are stored.
To switch to % transmittance or absorbance readings
A list of available evaluation forms appears.
Note: The selected chemical form is displayed, but does not become
the default. To change the default, see
working procedure) into the cell compartment and close the cell
compartment.
default setting.
section 5.5.3.1.