KYMCO XCITING 250 Owner's Manual page 99

Battery removal (Always keep ignition switch is OFF)
The battery is in the battery box below seat.
1. Open the seat (see page 34).
2. Remove the screws (1) and battery cover (2).
3. Remove the battery retainer (3).
4. Disconnect the negative (-) terminal lead (4) from the
battery first, then disconnect the positive (+) terminal
lead (5).
5. Pull out the battery from the battery box.
Battery installation:
Install in the reverse order of the removal.
(1)
(5)
(3)
93
(2)
(4)