KYMCO XCITING 250 Owner's Manual page 81

9. Install the oil strainer screen, spring and oil strainer
screen cap.
Oil strainer screen cap torque:
10. Fill the crankcase with the recommended grade oil
(see page 67) .
Oil capacity (after draining and oil filter change):
XCITING 500 AFI/XCITING 500:
XCITING 250 AFI/XCITING 250:
11. Install the oil filler cap/dipstick.
12. Start the engine and let it idle for 2 3 minutes.
13. Stop the engine and check that the oil level is at the
upper level mark on the oil filler cap/dipstick with the
scooter upright on firm, level ground. Make sure
there are no oil leaks.
15 N-m (1.5 kgf-m, 11 lbf-ft)
2.1 liter (2.2 US qt, 1.9 lmp qt)
0.9 liter (0.95 US qt, 0.8 lmp qt)
－
75