Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Swann FlashlightDVR SW244-TDV
Summary of Contents for Swann FlashlightDVR SW244-TDV
- Page 1 FlashlightDVR™ USER MANUAL SW244-TDV...
- Page 2 Contact your local government’s privacy information body or your local Police for more information on what if any restrictions you may face. Technical Support Swann Technical Support is available for any inquiries you may have. Website: www.swannsecurity.com USA/Canada: 1-800-627-2799, 1-877-274-3695 Australia: 1300 13 8324 Email: tech@swann.com.au...
-
Page 3: Package Contents
Introduction Thank you for purchasing the Swann FlashlightDVR™. This manual details the operation of the product. Please read it carefully and keep it for future reference. The Swann FlashlightDVR is an innovative ALL-IN-ONE PORTABLE solution for Flashlight, Camera and Digital Video Recorder. It is ideal for instant MPEG4 Video Recording for Security Applications. -
Page 4: Before Use
FlashlightDVR Layout Before Use Remove the end cap of the FlashlightDVR™ and install 3 C-size Ni-MH rechargeable batteries or 3 C-size alkaline batteries (not included). Tighten the end cap after installing the batteries. -
Page 5: Lcd Display
FlashlightDVR™ Control Panel There are 4 buttons on the control panel as below: 1. Flashlight button 2. Function button 3. Record button 4. Snapshot button VII. LCD Display... -
Page 6: Modes Of Operation
VIII. Modes of Operation 1) Time/Date Setup When batteries are installed in the unit, the Time Display Mode appears as shown below: A. Date Display Press Function button to enter Date Display mode. By default, 2007-January-01 will display as below: Press the Function button again to go back to Time Display mode. - Page 7 2) Battery Indicator The battery indicator appears in the upper left area of the display. When the indicator is empty the FlashlightDVR™ will no longer function properly and requires charging or battery replacement (if using alkaline batteries). One bar indicates the batteries are low and require charging or replacement as soon as possible.
- Page 8 Insert the Mini-SD card into the Min-SD card slot as shown below. Please make sure the orientation of Mini-SD card is correct. 5) Snapshot Mode To enter the snapshot mode, press and hold the button for 2 seconds. The LCD will display the SD Card data indicator and flash for approximately 10 seconds: After the data indicator disappears, the unit enters snapshot mode, with the LCD displaying 0 as below:...
- Page 9 Point the camera to the object and then press button to take a photo. The data indicator will flash under the SD logo: Once the DVR has finished processing the image, a number 1 will appear under REC indicating 1 picture has been saved: Press button again to take a second picture.
- Page 10 6) Video/Audio Recording To enter the video/audio recording mode, press and hold button for 2 seconds. The LCD will display the SD Card data indicator and will flash for approximately 10 seconds: After the data indicator disappears, the unit enters the video/audio recording mode, with LCD displaying 0 as below: Point the FlashlightDVR at an object and then press the button to start the...
- Page 11 Press the button to stop a video/audio recording. The data indicator will flash while the data is writing to the SD Card. The time display indicates the duration of the video/audio recorded. For example, the below figure indicates 10 minutes 3 seconds of video/audio has been recorded.
-
Page 12: Battery Charging
Upload/Download Files Data can be copied from the Mini-SD card to a hard drive. Data can also be copied, moved, and deleted. Note: FlashlightDVR features are disabled while connected to PC Disconnect from PC Do not disconnect the USB cable before performing the following: Left-click on the “Remove Hardware”... -
Page 13: Cautions For Use
Do not use batteries with varying voltages or charge as it may damage the unit. DO NOT disassemble the unit. DO NOT charge the unit in high temperatures. If there is a problem with the unit contact Swann Technical Support for assistance. -
Page 14: Product Specification
APPENDIX: Product Specification FlashlightDVR™ Model: Flashlight Built-in Cool-White 3Watt LED Brightness 3-Levels of Brightness Over Heat Protection Shut Down at 80 Degree C Imaging Sensor Color CMOS Sensor Active Pixel Array 300K pixels Sensor Resolution VGA 640 x 480 Horizontal View Angle 66°...