Cisco DPC3008 User Manual page 26

8x4 docsis 3.0 cable modem
Hide thumbs Also See for DPC3008:
Table of Contents

Advertisement

Chapter 2 Installing the DOCSIS 3.0 Cable Modem
Choose a location so that there is plenty of room to guide the cables away from
the cable modem without straining or crimping them.
Choose a location that allows adequate ventilation around the cable modem.
How Do I Mount the Cable Modem on a Wall? (Optional)
If you wish, you can mount the cable modem to a wall. This section describes how to
mount the cable modem to a wall, and includes a list of equipment you will need
along with suggestions for choosing an appropriate place to mount the cable
modem.
Select an Appropriate Place to Mount the Cable Modem
You may mount the cable modem to a wall that is made of cement, wood, or
drywall. When choosing an appropriate mounting place, refer to the following
recommendations:
Ensure that the mounting location is free of obstructions on all sides, and the
cables should be able to easily reach the cable modem without strain.
Leave sufficient clearance between the bottom of the cable modem and any
flooring or shelving underneath to allow access to cabling.
Allow enough slack in all cables so that the cable modem can be removed for any
required maintenance without disconnecting the cables.
Equipment Needed
Verify that you have the following items that you will need to mount the cable
modem:
Two wall anchors for #8 x 1-inch screws
Two #8 x 1-inch pan head sheet metal screws
Drill with a 3/16-in. wood or masonry bit, as appropriate for the wall
composition
A copy of the wall-mounting illustrations shown on the following pages
10
4022345 Rev B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Epc3008

Table of Contents