Table of Contents
Advertisement
CPS3500PIE/CPS3500PRO/CPS3500STD
CPS5000PIE/CPS5000PRO/CPS5000STD
CyberPower North America
CyberPower Systems (USA), Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Tel: 877-297-6937
Fax: 952-403-0009
Website:
http://www.cyberpowersystems.com
E-mail: sales@cyberpowersystems.com
CyberPower Europe
CyberPower Systems B.V.
Flight Forum 3545,5657DW Eindhoven,The Netherlands
Tel: +31 (0)40 2348170
Fax: +31 (0)40 2340314
Website:
http://eu.cyberpowersystems.com/
E-mail: sales@cyberpower-eu.com
User's Manual
K01-0000137-02
Advertisement
Table of Contents
Related Manuals for CyberPower CPS3500PIE
Summary of Contents for CyberPower CPS3500PIE
- Page 1 User’s Manual CPS3500PIE/CPS3500PRO/CPS3500STD CPS5000PIE/CPS5000PRO/CPS5000STD CyberPower North America CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Tel: 877-297-6937 Fax: 952-403-0009 Website: http://www.cyberpowersystems.com E-mail: sales@cyberpowersystems.com CyberPower Europe CyberPower Systems B.V. Flight Forum 3545,5657DW Eindhoven,The Netherlands Tel: +31 (0)40 2348170...
-
Page 2: Table Of Contents
REPLACING THE BATTERY ............9 DEFINITIONS FOR ILLUMINATED LCD........10 EPS STATUS INQUIRY AND FUNCTIONS SETUP......11 1. G .....................11 ENERAL 2. S ....................11 FAULT WARNING DISPLAY AND ALARM ........13 TROUBLE SHOOTING............... 14 TECHNICAL SPECIFICATIONS ............ 15 Copyright © 2009 CyberPower Systems, Inc. -
Page 3: Safety And Emc Instruction
Do not disconnect the mains cable on the EPS or the building wiring socket outlet (shockproof socket outlet) during operations since this would remove the protective ground of the EPS and of all connected loads. CAUTION! THE EPS shall be connected to the emergency switching device. Copyright © 2009 CyberPower Systems, Inc. - Page 4 EN62040-1-1 EMI: Conducted Emission: IEC/EN 62040-2…Category C2 Radiated Emission: IEC/EN 62040-2……Category C2 Harmonic Current: IEC/EN61000-3-2 Voltage Fluctuations and Flicker: IEC/EN61000-3-3 EMS: IEC/EN61000-4-2(ESD) IEC/EN61000-4-3(RS) IEC/EN61000-4-4(EFT) IEC/EN61000-4-5(lightning surge) IEC/EN61000-4-6(CS) IEC/EN61000-4-8(Magnetic) IEC/EN61000-2-2 (Immunity to low frequency signals) Copyright © 2009 CyberPower Systems, Inc.
-
Page 5: Installing Your Eps
Wait 10 seconds. Make sure the circuit breaker is depressed and then turn the EPS on. 6. To maintain optimum battery charge performance, make the EPS plugged into an AC outlet at all times. Enabling the switch provides the bypass for charge only. Copyright © 2009 CyberPower Systems, Inc. -
Page 6: Description
*Note: (CPS3500PIE/CPS3500PRO/CPS3500STD & CPS5000PIE/CPS5000PRO/CPS5000STD Series) or greater. 2. AC Inlet AC input terminals *Note T he O.D. of the distribution cables must be 10AWG (CPS3500PIE/CPS3500PRO/CPS3500STD ： ： ： ： & CPS5000PIE/CPS5000PRO/CPS5000STD) or greater. 3. DC Inlet Battery input terminals *Note ：... - Page 7 SNMP/DB9/USB Network slot Remove the cover panel to install optional SNMP/DB9/USB CARD that allows remote monitoring and control of your UPS through network or cable. * Note: This function only provide on PRO Series. Copyright © 2009 CyberPower Systems, Inc.
-
Page 8: Installation Guide
Step 2 Step 3 3. Connect the AC OUTPUT connections (AC plugs or terminal connections). (Step2) 4. Connect the AC power source to AC INPUT (Make sure AC power is off first). (Step3) Copyright © 2009 CyberPower Systems, Inc. - Page 9 11. When the external battery needs to be maintained or replaced remember to turn the machine off. Once off, remove the AC power source and switch off the BATTERY SW. before maintenance or replacing the batteries. When the work is complete, please start from Step 1 to re-install the machine. Copyright © 2009 CyberPower Systems, Inc.
-
Page 10: Replacing The Battery
Do not open or mutilate the batteries. Released electrolyte is harmful to skin and eyes and may be toxic. CAUTION! The external battery cabinet must be provided with 100A x2/ 80V for models CPS3500PIE , CPS3500PRO,CPS3500STD,CPS5000PIE, CPS5000PRO and CPS5000STD of DC protective device. CPS3500PIE Series include CPS3500PIE 、... -
Page 11: Definitions For Illuminated Lcd
To clear the overload, unplug some of your equipment from the battery supplied outlets until the icon is no longer illuminated and the alarm stops. 9. FAULT MODE Icon: This icon illuminates if there is a problem with the EPS. Please contact Copyright © 2009 CyberPower Systems, Inc. -
Page 12: Eps Status Inquiry And Functions Setup
CPS3500&CPS5000 Series CyberPower Systems for further help and support. 10. BATTERY CAPACITY Meter: This meter displays the approximate charge level (in 20% increments) of the EPS's external battery. During a blackout or severe brownout, the EPS will switch to battery power, the ON BAT icon will be illuminated, and the charge level will decrease. - Page 13 Note: If user wants to return to general mode without saving changes, there are two methods: 1. Wait for the backlight to turn off Press and hold the “Display” toggle for 10 seconds Copyright © 2009 CyberPower Systems, Inc.
-
Page 14: Fault Warning Display And Alarm
Input/ Output Output-Off -- incorrect Input/ connection. Output connection Can Not Start Up None Cold Start Battery High Voltage Output-Off Check the reason for battery voltage is too high battery over-voltage. during cold start. Copyright © 2009 CyberPower Systems, Inc. -
Page 15: Troubleshooting
EPS back on. This should reset the unit. The serial cable is not the You must use the cable included with cable that was provided the unit for the with the unit. Software. Copyright © 2009 CyberPower Systems, Inc. -
Page 16: Technical Specifications
Environmental Temperature to 104 to 40 ℉ ℉ ℃ ℃ Relative Humidity 0 to 95% Non-Condensing Physical Dimensions (L*W*H)( mm ) 330*260*440 Weight (Kg) 36 Kg 34 Kg 44 Kg 42Kg Safety Certificated CE/SONCAP Copyright © 2009 CyberPower Systems, Inc. - Page 17 CPS3500&CPS5000 Series Copyright © 2009 CyberPower Systems, Inc.
- Page 18 Flight Forum 3545,5657DW Eindhoven,The Netherlands Tel: +31 (0)40 2348170 Fax: +31 (0)40 2340314 Website: http://eu.cyberpowersystems.com/ E-mail: sales@cyberpower-eu.com Entire contents copyright © 2009 CyberPower Systems, Inc. All rights reserved. Reproduction in whole or in part without permission is prohibited. Copyright © 2009 CyberPower Systems, Inc.