Alfa Romeo 159 Owner's Manual page 28

To set the speed limit, proceed as fol-
lows:
❒ press button MENU until selecting
SPEED BEEP: the display will show
SPEED BEEP and setting condition
(ON = speed limit on/ OFF= speed
limit off);
❒ press again button MENU: ON (or
OFF) will flash;
❒ press buttons +/– to select ON or
OFF;
❒ selecting ON will make the last
speed limit set flashing on the dis-
play;
❒ press buttons +/– to adjust the val-
ue.
IMPORTANT The possible setting is be-
tween 30 and 250 km/h (or between
20 and 150 mph) depending on the unit
set previously (see paragraph "Units" de-
scribed later). Every press (pulse) of the
button +/– increases or decreases the
value by 5 units. Keeping the button +/–
pressed obtains automatic fast increase or
decrease. When you are near the required
setting complete adjustment with single
presses.
Clock (TIME REG)
This function enables to adjust the clock.
To adjust the clock proceed as follows:
❒ press button MENU until selecting
TIME REG;
❒ press again button MENU: TIME
and clock will flash;
❒ press buttons +/– to adjust time.
Clock is always displayed in 24h mode
(24 hours).
Failure/warning buzzer
volume (BUZZ)
With this function the volume of the
buzzer accompanying any failure/warn-
ing indications can be adjusted accord-
ing to 4 levels. The buzzer can be ad-
justed and excluded.
Proceed as follows:
❒ press button MENU until selecting
BUZZ: the display will show BUZZ
and a figure corresponding to the
buzzer volume level;
❒ press again button MENU: the fig-
ure will flash;
❒ press buttons +/– to adjust the
buzzer volume.
To mute the buzzer set the volume lev-
el to "0" using buttons +/–.
27