Download Print this page
Greenheck H-CUBE. Manual

Greenheck H-CUBE. Manual

Greenheck exhaust fans

Advertisement

Quick Links

High Wind and Hurricane Zone Fans
Models H-G, H-GB, H-CUE and H-CUBE
Belt and Direct Drive Exhaust Fans
The Hurricane season has brought a new level of attention to wind resistance in the
HVAC Industry. As you know, 2005 ended the worst hurricane season in history. With
this increased level of awareness, comes a greater need for high wind resistant roof
mounted equipment. To prevent water infi ltration and building damage, it is critical that
roof top equipment stay affi xed to the roof. But how do you know which product can
withstand high winds? Turn to Greenheck Models H-G, H-GB, H-CUE and H-CUBE to
ensure your exhaust fans stay affi xed to the roof.
Hurricane winds start at 75 mph. At speeds of 150 mph, wind can exert a 61 pound per
square foot pressure or over 750 pounds of force on a fan and curb. Forceful winds
were the cause of most hurricane damage, exceeding $124 billion dollars in damage in
2005.
Greenheck is leading the Hurricane Standards development
Models H-G, H-GB, H-CUE and H-CUBE are third-party tested
Finite Element Analysis (FEA) done by licensed Professional Engineer
(including P.E. in Florida, Texas, Louisiana...)
Full scale wind tunnel tested to 150 MPH
Tested as an assembly
No tie downs to roof are required
Severe weather calls for serious protection. We have the solution. Greenheck Models
H-G, H-GB, H-CUE and H-CUBE. Remember that these are the only tested and proven
high wind resistant fans. Don't sacrifi ce quality and durability–specify the only fans that will
survive hurricane force winds.
November
2006

Advertisement

loading

Summary of Contents for Greenheck H-CUBE.

  • Page 1 High Wind and Hurricane Zone Fans Models H-G, H-GB, H-CUE and H-CUBE Belt and Direct Drive Exhaust Fans The Hurricane season has brought a new level of attention to wind resistance in the HVAC Industry. As you know, 2005 ended the worst hurricane season in history. With this increased level of awareness, comes a greater need for high wind resistant roof mounted equipment.
  • Page 2 High Wind and Hurricane Zone Fans Withstands winds up to 150 MPH The Greenheck Models H-G and H-GB are downblast roof exhaust fans. Applications include general clean air and light moisture exhaust. The downblast design is ideal for all applications where air is discharged directly onto the roof surface. Models H-G and H-GB have been specifi...
  • Page 3 High Wind and Hurricane Zone Fans Third Party Testing and Certifi cations The Greenheck high wind models have been thoroughly tested in accordance with recognized standards. With the H-G, H-GB, H-CUE and the H-CUBE you are not only getting a superior product built by a quality company, you are getting the assurance through a number of third party certifi...
  • Page 4: Typical Installation

    Typical Installation Fan to Curb Mounting H-GB Fasteners Size Size Per Side 060 - 141 098 - 161 150 - 180 180 - 300 Fan to curb tie down is not required to meet 150 MPH wind loads for size 240 and smaller.
  • Page 5 Typical Installation Metal Building/Steel Deck Anchoring 1¼ inch (32 mm) H-GPF Curb Height 8 to 18 inches (203 to 457 mm) (Optional 24 inch 1¼ inch (610 mm) SD Curb) (32 mm) Corner Detail Roof Truss H-GB H-CUE H-CUBE Size Size Size Size...
  • Page 6 Licensed P.E. calculations for attachment of fan to curb shall be available for ASCE 7-02 determined design pressure. • All calculations and testing shall be done by a state licensed P.E., and a certifi ed test lab. Fans shall be Greenheck models H-GB and H-GB-HP, manufactured by Greenheck Fan Corporation in Schofi eld, Wisconsin. ®...
  • Page 7 • All calculations and testing shall be done by a state licensed P.E., and a certified test lab. Fans shall be Greenheck models H-CUE or H-CUE-HP manufactured by Greenheck Fan Corporation in Schofield, Wisconsin. H-CUBE — Belt Drive Model H-CUBE spun aluminum exhaust fans shall be centrifugal belt driven type. The fan wheel shall be centrifugal backward inclined, constructed of aluminum and shall include a wheel cone carefully matched to the inlet cone for precise running tolerances.
  • Page 8 Severe Duty Products Models LDP/LBP are the only rooftop exhaust fan that can withstand design pressures in excess of 140 PSF. The LDP/LBP with SDLE enclosure passes all Miami-Dade and Florida Building Code requirements (TAS-201/202/203). The severe duty LDP/LBP is constructed of Miami- Dade approved louvers (model ESD-603D) with a high strength structural steel support frame, and ships mounted to a 12 gauge steel curb.

This manual is also suitable for:

H-cueH-gH-gb