Coleman Eagle Rock 9277C957 Instructions

When You Are Ready To
Set Up Your Tent
–Select a level campsite clear
of rocks, branches and other
hard or sharp objects.
–Do not set up your tent
under trees.
–For best results in windy
conditions position the end
of tent into the wind.
1 Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip door.
–Stake down tent corners only, using the
stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)
–Assemble frame poles by interlocking
shock-corded poles. (four poles)
–Insert the poles into pole sleeves.The
longer black poles should cross forming
an "X" in the middle of tent. The shorter
side gray poles insert into sleeves
running front to back. (illus. 1)
illus. 1
Assembled
poles
inserted
through
pole
sleeves
Side Poles
Eagle Rock
Instructions apply to Part Number 9277C957
Part No. 9277B953
Part No. 9277B952
Part No. 9277C950
Front Door
illus. 2
Tent stake
through ring
on stake loop
™
Main Tent Poles
Side Poles
Rainfly Pole
2 Connect Frame to Tent
–Insert one pin into the end of main tent
pole at tent corner. (illus. 3, illus. 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole end.
–Repeat for second pole.
–Insert pin into the end of side pole, go to
opposite end of pole and apply pressure
until you arch the pole and can insert the
pin into the pole. (illus. 3, illus. 4)
–Repeat for other side pole.
–Tie top frame tie. (illus. 5)
9'6"x7'
Rainfly
Part No. 9277C951
illus. 5
Frame Tie
Tent frame
illus.3
Insert pin into pole end
illus. 4
set-up