Coleman TIOGA 9273B128 Instructions

When You Are Ready To Set Up
Your Tent
–Select a level campsite clear of rocks,
branches and other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
do not position the door of tent into
the wind.
–See owners manual for more tips.
1 Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with doors
facing desired direction. (illus. 1)
–Unzip doors.
–Stake down tent corners only, using the
rings at the end of the stake loops.
Keep the floor taut. (illus. 2)
–Assemble Frame Poles by
interlocking shock-corded poles.
This will make three long poles.
–Insert the poles diagonally into three
Pole Sleeves. (illus. 1)
illus. 1
Insert poles
through
three pole
sleeves
TIOGA
™
Instructions apply to Part Number 9273B128
POLE ASSEMBLY PARTS
Part No. 9273-121
Main Tent
Poles
Part No. 9273-122
Rainfly
Pole
Rainfly Part No. 9273B123
2
illus. 2
Tent stake
through ring
12'x 8'
Connect Frame to Tent
–Insert one end of main tent pole end
onto pin of pin & ring system, at tent
corner. (illus. 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.
–Repeat for second and third poles.
illus. 3
illus.4
Insert pole end onto
pin & ring
Tent frame
set-up