Overview - Epson AcuLaser M1400 Series User Manual

M1400 series
Hide thumbs Also See for AcuLaser M1400 Series:
Table of Contents

Advertisement

Overview

The printer has one color toner cartridge: black (K).
When the toner cartridge reaches its usable life-span, the LEDs on the operator panel light on, and the
following messages appear on the Printer Status window.
LED
Error
Ready
*1
This warning appears only when Epson toner cartridge is used (Non-Genuine Mode is set to off at the Printer Setting
Utility).
*2
When a high capacity toner cartridge is set, the remaining page yield is approx. 400 pages.
Important:
❏ When placing a used toner cartridge on a floor or on a table, place a few sheets of paper under the
toner cartridge to catch any toner that may spill.
❏ Do not reuse old toner cartridges once you remove them from the printer. Doing so can impair print
quality.
❏ Do not shake or pound the used toner cartridges. The remaining toner may spill.
❏ We recommend you to use up the toner cartridges within one year after removing them from the
packaging.
Message
The Black Cartridge needs to
*1
be replaced soon.
Replace the toner cartridge.
Or check that the cartridge is
correctly set.
Epson AcuLaser M1400 Series
Remaining Page
Printer Status and Action
Yield
*2
The toner cartridge has become low.
Approx. 200 pages
Prepare a new one.
The toner cartridge has become end
of its service life. Replace the old toner
cartridge with a new one.
User's Guide
Maintenance
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents