Epson AcuLaser M1400 Series User Manual page 49

1. Click start — Printers and Faxes.
2. Right-click the icon for your printer, and then select Properties.
3. Select the Configuration tab.
4. Click Custom Paper Size.
5. Select the custom setup you want to define from Details.
6. Specify the length of the short edge and long edge under Change Setting For. You can specify the
values either by entering them directly or using the up arrow and down arrow buttons. The length
of the short edge cannot be longer than the long edge, even if it is within the specified range. The
length of the long edge cannot be shorter than the short edge, even if it is within the specified
range.
7. To assign a paper name, select the Name the Paper Size check box, and then enter the name in
Paper Name. Up to 14 characters can be used for the paper name.
8. If necessary, repeat steps 5 to 7 to define another custom size.
9. Click OK twice.
Printing on Custom Size Paper
Use the following procedures to print using either the Windows or Mac OS X print drivers.
Using the Windows Print Driver
This section explains the procedure using Windows XP WordPad as an example.
Note:
The way to display the printer Properties/Printing Preferences dialog box differs according to the
application software. Refer to the manual of your respective application software.
1. From the File menu, select Print.
2. Select the printer as the printer to be used and click Preferences.
3. Select the Paper/Output tab.
4. Select the size of the original document from Paper Size.
Epson AcuLaser M1400 Series User's Guide
Printing Basics 49