Step 2: Connecting The System; Connecting The Speakers - Sony BDV-E2100 Operating Instructions Manual

Installing all speakers in
front position
(Speaker layout: [All Front])
D A F G C
Note
• Be sure to select the speakers layout setting
(page 41) according to your speakers
placement.
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a
specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.
• Do not lean or hang on a speaker, as it may fall
down.
Tip
You can install the speakers on a wall. For details,
refer to the supplied "Speaker Installation
Guide".
US
18
Step 2: Connecting the
System
B E
Do not connect the AC power cord (mains
lead) of the unit to a wall outlet (mains)
until all the other connections are made.
(BDV-E6100/BDV-E4100 only) To
assemble the speakers, refer to the supplied
"Speaker Installation Guide".
Note
When you connect other equipment with a
volume control, turn down the volume of the
equipment to a level where sound is not distorted.
Connecting the
speakers
Connect the speaker cords to match the
color of the SPEAKERS jacks of the unit.
When connecting to the unit, insert the
connector until it clicks.
Red
(Front right
speaker (R))
Purple
(Subwoofer)
White Green Blue
(Front left (Center (Surround left
speaker (L)) speaker) speaker (L))
Gray
(Surround right
speaker (R))